Versiones de la plataforma

Despacho y rutas

Choose which route statuses the Driver Board shows

Settings → Systems → Dispatch now has "Driver Board shows": Active, Pending and Completed (Completed includes archived routes). The board's columns and its [+] route picker list only the selected statuses; a past day always shows every status. Companies that already use RushHour keep every status until an admin changes it; new companies start with Active and Pending. Below the picker, "Available Driver" now reads "Create a new route".

Despacho y rutas

Search the Driver Board by order number, and assign a driver from a route card

The Driver Board has its own search: every column lists only the stops that match, and an order number also suggests the routes that are not on the board but carry that order, which you can add or dismiss. The search is kept in the page address, so a bookmark or reload keeps it. On a route card, the new "Assign Driver" action (and picking a driver on the card) opens Edit Route with that driver filled in, so the truck and zone can be checked before saving.

Pedidos y cotizaciones

Keep creating orders when the address service is down

If the map provider cannot be reached while you type an address, you can continue offline: search your saved addresses only, or enter the address by hand. Such an address is marked "Offline address" and is checked again automatically once the address service is back; if it cannot be found, the badge asks you to update it on the customer or location.

Pedidos y cotizaciones

Estimated cost, profit and selling total under the order price

For admins, an order now shows tiles under its price with the estimated cost (miles × truck cost per mile), the estimated profit and the selling total, for every price type; Price Details (Classic) adds a cost breakdown column. The price hover keeps showing the estimate as before. In Settings → Expenses → Setup → Cost settings you can also choose where the AI price suggestion takes its truck cost per mile from: the Trucks tab (as before) or New Trucks.

Facturación y contabilidad

Filter invoices that are not fully paid

The accounting Payment Status filter has a new choice, Unpaid: invoices with no payment yet or paid only in part. The old invoice list now has the Payment Status filter too (Paid, Pending, Unpaid, Overdue).

Plataforma

Repairs & Parts and Fuel Stock expenses, and monthly costs for all drivers

Settings → Expenses has two new tabs after Office: Repairs & Parts and Fuel Stock, each a monthly list like Office, and the Drivers tab gets a "Monthly costs for all drivers" list. These amounts are not included in the vehicle cost per mile.

Plataforma

Optionally allow only one Company Portal session per account

Settings has a new "Multiple account access" option. With it turned off, signing in to the Company Portal signs the same account out of its other browser, after asking first. It is on by default, so nothing changes until an admin turns it off. The driver app and the Customer Portal are not affected.

Pedidos y cotizaciones

Repeat Order from the order page's action menu

The action (…) menu on the order page now has Repeat Order, in both the new and the old view. It works like the page's Repeat button: the new order (or quote) opens in its own tab, and the option is greyed out while the plan's order limit is reached.

Choferes y app de choferes

Choose whether the driver app turns sideways on tablets

Settings → Driver App → Features has a new switch, "Allow screen rotation on tablets". When on, drivers can turn an Android tablet or an unfolded foldable phone sideways and the app turns with it; when off, the app stays upright on these devices too. Phones always stay upright. It is on for every company, so nothing changes until an admin turns it off, and it applies to the Driver App from version 2.0.32 on Android.

Pedidos y cotizaciones

See the driver's truck move on the order map

The map on an order's details shows the truck of the driver carrying the order at its latest position, and moves it as new positions come in from the driver app.

Despacho y rutas

Route details from the route card menu, each in its own tab

A route card's menu on the Driver Board has a new "Route details" item, and every route you open keeps a tab named after its route number, so you can switch between routes the same way as between orders. A double-click on a route card follows Settings → Systems → "Record click opens", like a click on an order; Ctrl / Cmd + double-click always opens a new tab in the background.

Plataforma

Copy the old Trucks tab into New Trucks

Settings → Expenses → New Trucks has "Copy from the old Trucks tab": choose a range of months, see a preview of what will be copied, and copy the old tab's insurance, maintenance and other amounts into New Trucks or the monthly lists, for the whole fleet or per truck. Values already there are kept unless you choose to replace them, and a "Clear all values" option lets you start New Trucks again. The old Trucks tab itself is not changed.

Facturación y contabilidad

Choose whether the invoice screen shows your company details

A new setting, "Show your company’s details on the invoice screen", decides whether an invoice opened in Accounting shows your company’s name, contact details and logo (the "From" box) next to the customer’s "Bill To". It is on for every company, so nothing changes until you turn it off.

Facturación y contabilidad

Choose whether free waiting time appears on invoices

A new setting, "Show free waiting time on invoice" (Settings → Systems → Order), decides whether a stop that waited no longer than its free waiting time adds a $0 waiting time fee. It is on for every company, so invoices look the same until you turn it off; when it is off, invoice views and PDFs also leave existing $0 waiting lines out.

Plataforma

A Free plan for new companies

New companies can now sign up on the Free plan: $0 a month with no time limit and no onboarding fee, for 1 office user, 1 driver and 100 orders a month. A card is still entered at sign-up. The Free plan is for new accounts only, so a company on another plan cannot move to it, and Settings → Subscription says so on the Free plan. From the Free plan, company admins can upgrade to a paid plan in Settings → Subscription, and if the company has not had a free trial before, the upgrade starts with the paid plan's free trial: nothing is charged until the trial ends, and the paid plan's one-time onboarding fee applies as it does for a new sign-up.

Plataforma

Start an offered free trial from Settings → Subscription

Company admins who were offered a free trial can now start it from Settings → Subscription, without needing the emailed link. Until it starts, a "Your free trial is ready" card and banner show the way. The card shows the date the trial will end if you start it now, and right after starting it the page waits a few seconds for the trial to be confirmed instead of offering it a second time.

Despacho y rutas

Share a route's details: copy, share or email the link

On the Dispatch board, Live Share in a route's details now opens a menu: copy a link to that view, send it from another app (where the browser offers a share sheet), or email it. The email is sent from your company's mailbox when you are allowed to send email, and otherwise opens in your email app. The link opens the route's details for anyone signed in to your company who can open Dispatch, even when the route is not on their board, and it can be bookmarked.

Pedidos y cotizaciones

Choose whether a charge's entered price is the line total or a price per unit

When you enter your own price for an additional charge, you can now choose how it is billed: as the total for the line, or as a price per unit that is multiplied by the quantity. The choice is in the additional charges list on an order and when confirming a stop, and the totals follow it. Existing and new prices stay the total for the line unless you choose otherwise.

Facturación y contabilidad

Charge a customer's card from RushHour

When Cardknox is installed under Settings → Integrations, a new "Charge card" action is on the order and quote menus, the invoice preview, unpaid invoices in Accounting and the customer header; each saved card on a customer's Payments tab has "Charge this card", and Receive Payment has a "Charge Card Now" method. Choose "Charge now", or "Authorize only" to hold the amount on the card and capture it later; pay with a saved card or a new one entered in the secure card fields, and save the new card for next time. The payment is recorded in Accounting, and if the connection drops the form offers "Check payment status" instead of charging again. Company admins and roles that can already add or edit payments get the new "Charge customer cards" permission.

Facturación y contabilidad

Card transactions: capture holds, release them and refund card payments

Accounting → Payments Received has a new "Card Transactions" view that lists every card transaction, including holds that have not been captured yet, with gateway and status filters. From it, and from an invoice's payments list, you can capture a hold in full or in part, void it to release the card, or refund a card payment in full or in part with a reason. A refund goes back to the same card and leaves the payment in Accounting as it is, so reverse it there if your books need it. Payments taken by card show their card and status on Payments Received, invoices show a "Card holds on this invoice" strip, the invoice's activity log records each authorization, capture, void and refund, and staff get a notification two days before a hold expires. Voiding and refunding need the new "Refund and void payments" permission, given to company admins and roles that can add or edit payments.

Facturación y contabilidad

Payment requests: send customers a secure link to pay by card

"Request payment" sits next to "Charge card" on orders, quotes, invoices and customers. A request asks the customer to pay now, authorize a hold or save a card, for the amount you set, with an optional message and a link that expires after 1 to 90 days (30 to start with). RushHour emails the link to the address you enter, or to the customer's accounting email when you leave it blank, and you can also copy it. The customer opens the link without signing in, pays with a new card or, if you allow it, a saved one, can save the card for future payments, and sees a receipt. The new Accounting → Payment Requests page lists every request with its status and lets you open, copy, send again or revoke one, and the invoice's activity log records when a request is sent, paid or withdrawn. Creating, sending and revoking requests needs the new "Manage payment requests" permission.

Despacho y rutas

Outsource companies: their own markup and minimal cost rules

An outsource company's Finance tab has a new Markup (%), the markup added to that company's buying price. Leave it empty to follow the organisation markup from Settings → Billing, which the empty field shows. When the company's Type of Work includes Fixed, a new Minimal Cost Mode next to Cost Fixed (Minimal) chooses how the minimal cost is charged: Include covers an Included Distance, and only the miles or kilometers beyond it are added at Cost Distance; Additionally charges it on top of every mile or kilometer. Outsource prices on orders use these settings; route payouts are calculated as before.

Pedidos y cotizaciones

Price a Classic order from your outsource companies' prices

For admins, Price Details (Classic) has a new "Price based on: Internal / Outsource" switch. Outsource shows the Cheapest, Average and Highest of your active outsource companies' prices for the order (by distance, hourly or fixed, less each company's discount), or lets you choose a company and its method, with a separate outsource markup. The order is then priced at that buying price plus the markup, less the order's discount, and is recalculated with the same choice whenever it is re-priced; Internal keeps today's price and cost lines. Under the price, the Estimated Cost tile shows the outsource cost, so the estimated profit is right. When a whole order is assigned to a driver of an outsource company on the order page, admins are asked whether to recalculate the price with that company's price, and assigning your own driver to an outsource-priced order offers to switch back to the internal price. Prices by pallet are not included yet.

Plataforma

Get Samsara data: each truck's odometer for a month, next to the typed values

Company admins can click Get Samsara data on New Trucks in Settings → Expenses, and on a single truck's expenses, to read the odometer Start, End and Miles of each truck linked to Samsara for a month that is over. Samsara's values are kept next to the values people typed, which never change, and one set counts for each truck and month: Settings → Expenses → Setup → Cost settings chooses which one counts when a month has both (typed values, to start with), and any month can be switched on the Odometer tab. A preview shows what will change before anything is saved, months that look wrong (End below Start, more than 15,000 miles, or a Start below last month's Samsara End) are listed to check instead of copied, and badges show which trucks are linked. Samsara's fuel estimate for the month is shown next to Fuel for comparison and never counts in the cost per mile.

Despacho y rutas

The Route details map shows the drive history

In the new view, a route's Route details on the Dispatch board now draws the legs already driven (both stops confirmed) in grey and the legs still ahead in blue, with a legend. Each stop pin opens a card with its type, order number, whether it is confirmed, the address with a copy button, the time it was confirmed or is planned for, and its confirmed or planned items. The map follows the board's date, so a past day shows that day's trip. The confirmation time and items need the Route History permission.

Despacho y rutas

Route suggestions point to the route that already has the order's other stop

When you select an unassigned stop on the Dispatch page, a route that already has another stop of the same order, for example its pickup, now gets a blue "Related stop assigned" header. If it can take the order, it moves up to just after the three "Nearest zones" routes, unless it is already among them, so the rest of the order can go to the same driver. Under the header, the route names that stop: pickup or delivery, its address, and "done" when it is already confirmed. A route that cannot take the selected order says why in red, for example "Not enough pallet space (14/14 on the truck)". When the stop has no map location, the first three routes read "Suggested" instead of "Nearest zones", because they are not ordered by distance. This works in both views of the Dispatch page, and the route list answers sooner after you select a stop.

Facturación y contabilidad

Type an invoice fee as plain text

The invoice Fee Type list has a new Text option, above Create New and Add Waiting Time, in both the new and the old view. Choose it and type the fee's text: it is saved on that invoice only, with no charge type behind it, and nothing is added to your Additional Charges list. The × button goes back to the fee types. A fee's Fee Address also shows the whole selected address while you edit it.

Facturación y contabilidad

Choose which invoices can be sent and which can take payments

Settings → Billing has two new choices below Send to QuickBooks: Send Invoice and Add Payments, each set to "Any invoice" or "Approved invoices only". Send Invoice starts on Any invoice and Add Payments on Approved invoices only, which is how RushHour works today, so nothing changes until an admin changes them. Set Send Invoice to Approved invoices only to send only approved invoices, or Add Payments to Any invoice to record payments on Draft and Open invoices too, bulk payments included. When an action is not allowed for an invoice, its button is greyed out and says the invoice must be approved first. An invoice that was paid before it was approved can still be approved.

Facturación y contabilidad

Link a new invoice to one of the customer's orders

When you create an invoice in Accounting, in the new and the old view, a new Order field next to the customer lets you search for an order and link the invoice to it. Opened from a customer's own accounting page, the field lists only that customer's orders. Picking an order fills in its customer, billing address and payment terms if no customer is chosen yet, and the invoice uses the order's currency. If the order has no invoice yet, the new invoice becomes its default invoice. If it already has invoices, choose "Link only" to keep the current default invoice, or "Link and make default" to replace it when you save; customer balances may change, and you are warned first when the current default invoice is approved or was already sent to the customer or QuickBooks. Once saved, an invoice stays linked to the same order.

Pedidos y cotizaciones

Choose how a search of several words finds orders

Settings → Systems has a new "Orders search with several words" option. "Whole phrase or every word", the default and today's behaviour, lists an order that contains the whole phrase or every word somewhere, for example one word in the customer name and one in the PO number. "Any of the words" lists an order that contains at least one of the words, so BBQ Rapid finds both the BBQ orders and the Rapid orders. It applies to the Orders and Quotes search and to the global search; a one-word search works the same either way.

Despacho y rutas

Choose where live truck positions come from

Settings → Driver App has a new Real-time Truck/Driver Location section. Choose whether the live truck position on the Dispatch and Order details maps comes from the driver app, from Samsara or from neither (Offline), and which one a route uses when it has both. Both sources stay on by default, as before. While both are on, the menu of an active or pending route on the Dispatch board offers Location source, so a dispatcher can switch one route. When a route has both and the source it uses has sent no position for 20 minutes while the other one has, the Order details map follows the other one, so a Samsara unit that stopped reporting no longer keeps the truck at an old position. Settings → Fleet gets a GPS column that shows whether each truck's Samsara link is connected and when Samsara last saw it. Drivers' phones keep recording GPS for HOS and arrival times whatever you choose.

Despacho y rutas

New Route: a company or outsource driver, and the outsource company's truck types

When you create or edit a route, choose Company Driver or Outsource Driver first. Company Driver lists your own drivers and fleet trucks. Outsource Driver asks for the outsource company, then lists only its drivers, and the truck list shows that company's truck types, with how many trucks it runs of each, above your own fleet trucks. Picking a truck type puts that type on the route, because the outsource company's trucks are not listed one by one. This works the same in both dispatch views.

Despacho y rutas

Create Route Modes: build a route and its stops on one page

Settings → Systems → Dispatch has a new "Create Route Modes" choice for the new view of the Dispatch page. "Create Route only", the default, works as today: New Route and Edit Route open their dialogs. With "Create Route & Assign Stops", New Route opens the Create New Route page, where you choose the zone, driver type, driver and truck, add the route's stops from the unassigned list, put them in order and see the route on the map with its distance and driving time; Create route saves the route with its stops. Edit Route opens the same page for an existing route. There you can also set where the route starts and ends: the first or last stop's address, a point on the map, a warehouse or another address, with an optional scheduled time and a note. The driver app does not show these points yet. The search for a point lists your saved addresses and warehouses; choose Custom address for any other address. When the first or last stop has changed since the route was saved, a point set to that stop's address follows it, and if you can edit the route, the page asks you to save it to keep the change. Stops you add to a new route are listed under their planned day, as on a saved route. In Route details, a new Manage Route row shows the route at a glance, with its driver, truck, stops and start and end points, in either mode. The Driver Board always uses the New Route dialog, and the page asks before you leave it with unsaved changes.

Despacho y rutas

Dispatch map: base maps, overlays, legend and zoom controls

The dispatch maps get a map options menu (base map, weather radar, public alerts, fuel stations, your sites and geofences), a legend and zoom buttons, and selecting a route, stop or truck now works the same way everywhere on the map, with Escape stepping back and "Fit all" framing everything shown. Confirmed stops turn green right away, without a refresh.

Plataforma

Plan limits show as a bar at the top of the list

When your plan's order, driver or user allowance is running low or has been used, a bar at the top of the list screens says how many are left, when the period resets and links to updating your plan, instead of the small notice between the header buttons.

Plataforma

Bookmarks are now off until your company turns them on

Bookmarks are now off by default, for new companies and for every company already using RushHour. While they are off, nobody in your company sees the star beside page titles or the Bookmarks section at the top of the sidebar. Bookmarks people have already saved are kept, not deleted. To use bookmarks, turn on Bookmarks in Settings → Systems → Navigation and save; the star and everyone's saved bookmarks come back.

Facturación y contabilidad

Paid and Revised stamps beside the invoice logo

On the classic invoice, a fully paid invoice shows one larger PAID stamp next to the logo, and a revised invoice shows its REVISED stamp the same way, instead of a small stamp above the totals. The Paid amount in the totals is unchanged.

Facturación y contabilidad

Invoice item quantities take up to 2 decimal places

An invoice item's quantity can have at most 2 decimal places, matching what the invoice and the QuickBooks Desktop export print, so the printed quantity and the billed amount always agree. Whole numbers are not affected, and an invoice saved earlier with a longer quantity can still be saved unchanged.

Plataforma

Fuel Stock rows keep gallons or liters and the price per unit

On Settings → Expenses → Fuel Stock, each row can now record how much fuel was bought (gallons or liters) and the price per unit. If you leave the amount empty, it is worked out from the two.

Facturación y contabilidad

The invoice editor shows the same rows as the invoice view

In the new invoice editor, the order's items now show their rate and amount the way the invoice view does: the order price is shared across the items by quantity instead of appearing as a separate "Items Subtotal" row, and the totals are unchanged. A row you add with "Add item" is billed on top of the order price. The new invoice view also fits the screen at 100% zoom.

Integraciones y mapas

Settings → Integrations shows whether Telegram is connected

The Telegram row used to say "Install" even after a successful sign-in. It now asks Telegram: when your account is signed in, the row shows "Connected as" with the account's phone number and a Reconnect button, and when it is not, it shows "Not Connected" next to Install. If Telegram cannot be reached, the row stays as before. When Telegram is already connected, the sign-in dialog warns that sending a code disconnects the current account until you sign in with the new code, and a successful sign-in now says "Telegram is connected."

Integraciones y mapas

Route optimization with HERE, Mapbox or Radar no longer times out

When HERE, Mapbox or Radar takes too long to optimize a route spread over several days, RushHour now orders the route with its built-in optimizer instead of the whole optimization failing with a timeout.

Integraciones y mapas

Cardknox setup explains where to find your keys and tests them

Settings → Integrations → Cardknox now walks you through creating the API and iFields keys in the Cardknox (Sola) Merchant Portal, with a link to it, and "Test connection" checks the API key with Cardknox without saving it and tells you whether it was accepted.

Despacho y rutas

Find Route adds only the HUB leg of the stop you picked

On an order that goes through a HUB (set with Assign HUB), choosing a route in Find Route on the Dispatch page now adds only the leg of the stop you picked: the leg into the HUB or the leg out of it. Before, both legs were added to the same route. Find Route also checks each route's room against that leg alone, so it no longer passes over routes that have space for it. Other orders are added as a whole, as before, and a stop assigned through Ask AI moves the same way. If the stop is no longer waiting to be assigned, Find Route says so and adds nothing.

Facturación y contabilidad

Edit invoice rows with one click, and revert them

In the new invoice editor, one click opens a row for editing; a click on its checkbox or delete icon still does just that. Every item with its own rate, every fee and the order price lines have Qty, Rate and Amount: fill in any two and the third is worked out, and a fee's Amount is saved exactly as typed. Billable waiting time rows work the same way over their billable hours and take a description, and an open fee row shows its Fee Name and Fee Type again. A new Revert to original button puts the items, fees and tax back as they were when you opened the invoice; on an invoice made from an order it can instead take the order's current stops, items and fees, as if the invoice were created from the order now. Nothing is saved until you save the invoice.

Facturación y contabilidad

New invoices link only to active or closed orders, unless you allow others

A new invoice can now be linked only to an active or closed order, and an invoice linked to an order can bill only that order's customer. To also link new invoices to draft, quote or deleted orders, turn on "Allow invoices for draft, quote or deleted orders" in Settings → Systems → Order. It is off by default, and only users who can change the other Order settings can change it. Invoices that are already linked to an order are not affected. When a link is refused, the message says why and what to do instead, in English and in Hebrew.

settings

Settings → Systems in two columns, with a hint on every setting

On a wide screen, Settings → Systems now shows its settings in two columns instead of one long column, and every setting has an info icon that explains what it does.

Pedidos y cotizaciones

Assign HUB lists your warehouses first

In the Assign HUB dialog, in both the new and the old view, your warehouses are listed first and the form for a new warehouse opens from an "Add new warehouse" link; it opens by itself when there is no warehouse yet. Only users who can manage locations see the link, which matches who can save a new warehouse; other users are told to ask someone who can manage locations (Settings > Locations).

Plataforma

A loading bar while a section opens for the first time

The first time you open a section of the Company Portal, the page you are on now stays in place with a thin moving bar at its top while the section loads, so you can see that your click was taken.

settings

The user details form lists the address in the usual order

In Settings → Users, the user details form now lists the address as Country, State, City and Zip Code, the same order as the other address forms.

Plataforma

Orders and quotes open faster, and driver distances appear sooner

Opening an order or quote no longer makes the database sort every customer of the company, so it opens several times faster for companies with many customers. The driver distances in Assign Driver also no longer take up to half a minute when their data has not been read for a while.

Plataforma

Faster loading on slow connections

The API sends its data compressed, so the apps load lists faster on slow connections.

Despacho y rutas

Order search no longer lists a route the order has left

Searching an order on Dispatch could also list a route the order had already left after a stop was confirmed, undone and moved. Only routes that still carry the order's stops are listed now.

Despacho y rutas

The stop-limit label on unassigned orders fits beside the print icon

On the dispatch unassigned cards the red stop-limit label is now the single word "Limit" and no longer runs into the Print and menu icons. Its tooltip says why: too many stops for one route, and where to raise Max Route Addresses (Settings → Profile).

Plataforma

Clearer form fields: email errors and ZIP codes

An email field that fails validation now gets the same red border as the other fields. On Outsource companies the ZIP is filled from the selected city like on Customers, and an empty ZIP field shows the country's postal-code format next to its name.

Facturación y contabilidad

Add Payment and the order sidebars look the same in both views

The Add Payment window is consistent between the old and new view and its amount field is wider, and the order sidebars of the two views show the same sections.

Pedidos y cotizaciones

Items on a stop can share a name again

Several items on the same stop can again have the same name, for example three items called "Freight". The name check now runs only for companies that turn on "Validate unique item names" in Settings → Systems → Order; it is off for every company until an admin turns it on.

Pedidos y cotizaciones

The order audit log shows the draft status as "Draft"

In an order's audit log, the draft status was shown with a spelling mistake. It now reads "Draft", including in "Order created" and "Order reverted" entries.

Facturación y contabilidad

An invoice paid to the cent always shows as Paid

An invoice whose payments cover it to the cent could stay "Partially paid" because of a rounding remainder far below a cent. Now an invoice counts as paid once less than half a cent is left, everywhere: status, balances, filters, AR aging, pay links and the payment screens. An invoice that still owes half a cent or more shows at least $0.01 due.

Facturación y contabilidad

Saving an order with a stop fee no longer creates a new invoice

Every save of an order with a stop fee or waiting time replaced its invoice with a new one, and payments stayed on the old invoice. The invoice is now rebuilt only when something on it really changed, and when it is, the payments move to the new invoice.

Pedidos y cotizaciones

Creating a quote no longer fails for some stop addresses

Creating a quote could fail with an error when a stop's address had no city (for example, a request from the website quote form) or when the address carried its country. Such quotes are now created.

Integraciones y mapas

QuickBooks Desktop export: priced item lines carry their amount

In the QuickBooks Desktop (IIF) export, an invoice whose item lines have their own prices did not balance, because those lines were exported without an amount, so QuickBooks Desktop could refuse it or book a different total. Item lines with a price now carry their amount, and the imported invoice matches the one in RushHour.

Plataforma

A failed Telegram send says why

When a Telegram message cannot be sent, the message now says why (for example, that Telegram is not connected, with where to reconnect it) instead of "try again later".

Despacho y rutas

Dispatch toolbar filters stay on one row

The Dispatch toolbar keeps its filters on a single row, and disabled drop-downs are easier to tell apart in the dark theme.

Plataforma

Clearer wording in Hebrew and English

Payment statuses, the Cancel button, the repeat-order message, the State field and geofences now read correctly in Hebrew, invoices say "Partially Paid", and repeating an order or quote now confirms "A repeat order has been created." Warnings shown after saving an order or quote also appear in your language.

Despacho y rutas

Stop arrival and departure times stay correct in every time zone

Arrival and departure times confirmed in dispatch, or entered in an invoice's waiting-time window, are now saved as exact times. The Company Portal shows them in each user's local time, and the invoice's waiting-time line and the order's audit log show them in the time zone they were entered in. Times saved before this release are shown as before.

Pedidos y cotizaciones

Orders list arrival times in your own time zone

On the Orders list, the planned and actual arrival shown for a stop now appear in your own time zone, with its name (for example EDT, EST or GMT+2), matching the time on the order itself. Before, they were always labeled EST, and the planned arrival could show several hours off.

Facturación y contabilidad

Fees with a fractional quantity are billed to the cent

An additional charge with a fractional quantity, such as 2.5 hours of waiting at $8.33 an hour, is now billed rounded to the cent ($20.83), the same way invoice item lines are: on the order, on the invoice and in automatic billing. Whole-number quantities are billed exactly as before, and an existing invoice is not replaced because of the half cent.

Facturación y contabilidad

Invoices and exports print a longer quantity as entered

Invoices, invoice documents and the QuickBooks Desktop export now print a quantity with up to 4 decimal places, as it was entered, instead of rounding it to 2. A line saved earlier with a quantity such as 0.333 no longer prints "0.33" beside an amount billed on the full quantity. Whole numbers and quantities with 1 or 2 decimal places print exactly as before.

Plataforma

Restarting a subscription no longer repeats its message on reload

After you restart a subscription from Settings → Subscription, the confirmation shows once. Reloading the page or opening a bookmark no longer shows it again.

Choferes y app de choferes

Charge quantities stay as the office set them when a driver confirms a stop

When a driver confirms a stop in the driver app, the charges the office already put on that stop now keep their quantity, for example 2.5 hours of waiting, instead of being reset to 1. They also open already ticked in the app's charges step, with their note and price. A charge the driver adds still starts at 1. On long routes, stops after the twentieth item now keep their hold, cash-on-delivery and charges steps in the driver app.

settings

Removing the Cardknox integration shows a clear confirmation

After you remove the Cardknox integration in Settings → Integrations, the confirmation now reads as a proper message in English and Hebrew instead of a technical placeholder.

Choferes y app de choferes

The driver app’s map shows every stop of the driver’s current routes

The stop list under the driver app’s map now covers all of the driver’s active and pending routes, with every stop — including hold badges and “Collect $X” lines. It used to get only 20 stops in all, taken from every route the driver ever had that was still on file, so for a driver with history it could show old, completed stops and miss today's. This applies to every installed app version as soon as this release is on.

Facturación y contabilidad

A pre-filled unit price starts as "Price per unit", and the order log shows a charge's price type

In the confirm-stop dialogs, a charge whose unit price is filled in for you now starts as "Price per unit", so a $8.33 per hour waiting charge at 2.5 hours bills $20.83 rather than $8.33; you can still switch it to "Total for the line". The order's audit log records a charge's price type ("Price type": Total for the line or Price per unit) when it is switched, and when a charge is added with a price per unit.

Integraciones y mapas

Removing the HERE or Radar key now saves and turns the integration off

In Settings → Integrations, “Remove key” on HERE (and removing the last key on Radar) used to be refused on Save, so a stored key could not be deleted. Saving now removes the key and switches the integration off, after a warning that says what takes over until you add a key and turn it back on: your other enabled integrations or RushHour’s default provider for geocoding, routing and optimization, and the default map instead of HERE Maps.

Integraciones y mapas

Cardknox charges card payments in the right currency

A card payment through Cardknox is now charged in the currency of its invoice, order or payment request. Before, a payment in another currency, such as ILS or EUR, was charged the same number in US dollars. Settings → Integrations → Cardknox has two new settings: the currency your Cardknox account is in (USD unless you change it), and Multi-Currency Conversion (MCC), to turn on only after Sola has enabled it on your account. A payment in a currency your account can't charge is refused before anything is charged: staff see what to change in the settings, and customers paying online are asked to contact you to pay another way.

Facturación y contabilidad

A saved-card payment charges the card you picked, and never twice

Add Payment with a customer's saved card now charges the card selected in the form; before, a customer with several saved cards was always charged on the first one. If the answer to a saved-card payment is lost, the form locks and offers "Check payment status", which can never charge the card a second time.

Integraciones y mapas

Cardknox card fields follow dark mode

The Cardknox card fields no longer show a white box in dark mode, and two Hebrew labels in the Cardknox settings were corrected.

Despacho y rutas

Outsource companies: Discount (Per Order) starts at 0, and the Finance tab saves new finance details

When you add an outsource company, Discount (Per Order) now starts at 0, so the company saves without typing a discount. Before, the field only looked filled in and Save said the discount was required. On an outsource company's Finance tab, a company that has no finance details yet can now save them; before, Save failed. The discount is readable in dark mode, and in Hebrew the discount types and the required-field messages appear in Hebrew.

Pedidos y cotizaciones

A typed buying price is saved with the order

On the order page, a buying price typed into the Total Cost box was lost when you pressed Save without first pressing the box's own check button. Save now stores it, and the buying price can also be entered and saved without switching the order to edit mode.

Pedidos y cotizaciones

Assign Driver: your own drivers and outsource drivers on separate tabs

In an order's Assign Driver panel, "My drivers" now lists only your company's own drivers, and the "Outsource drivers" tab, which used to show a placeholder, lists your outsource companies' drivers, with the same search, filters and pages. The panel always opens on "My drivers". Searching for a driver by a pasted full name now finds them even when the name has extra or unusual spaces, and the name also works last name first. The spacing fix also applies to searches on the Drivers, Orders, Customers and Trucks lists. This works in both order views.

Despacho y rutas

Stop actions work in the Route details view

In the Route details view of the Dispatch page, confirming a stop, marking a confirmed stop as not done again, adding stops, Create Delivery and a stop's pop-up did nothing. They now work as they do on the route card, with the same dialogs and checks, including the Confirm stop dialog and the stop limit when you add stops.

Despacho y rutas

Selecting a route always moves the map to it

On both dispatch maps, selecting a route now always moves the map to it. A route with only one stop that can be placed on the map centers on that stop, and when none of a route's stops has a map location, a "Route not on map" message says so and asks you to check the stop addresses on the route's orders, instead of the map staying where it was.

Plataforma

The header search finds the route an order is on

Searching an order number in the header search no longer answers "No results found" when the order is on a route: under Drivers, the search now also lists Routes and Orders. Choosing a route opens the Dispatch board with the search applied, so it shows the route with that order's stops, and choosing an order opens it.

Despacho y rutas

Route cards list the stops that match the Routes search

On the Dispatch board, an open route card, its Route details and a reloaded card now list the stops that match the search typed in the Routes panel, the same search the card's stop count uses, so typing an order number shows only that order's stops. Clearing the search box also removes it from the page address, so a reload or a shared link no longer brings the cleared search back. Driver Board columns keep their own search.

Despacho y rutas

A delivery added to a route always goes after its order's pickups

When you accept a suggested route for an unassigned order, or the assistant assigns it, and the route already has that order's pickup, the delivery now goes after the pickup, even when the suggested position is earlier. Before, the route was only in the right order after Optimize Route. The assistant's confirmation now says the stop never goes before this order's pickups already on the route.

Plataforma

Phone fields no longer say "required" before you type

A required phone field no longer shows its "required" message as soon as a form opens, and its dial code now follows the country chosen in the form until you pick a dial code yourself.

Despacho y rutas

Remove from route says where the stop went

After you use Remove from route on a stop of a route card, in either view of the Dispatch page, the message now reads "The stop has been moved to the unassigned list." or, for several stops, "3 stops have been moved to the unassigned list." It used to read "Route Stop Move To Unassigned Successfully."

Plataforma

Customers with many contacts open much faster

Opening a customer read its contacts, emails, addresses and payment methods in one database query whose size multiplied with each of them, so a customer with hundreds of contacts could take a minute or more to open, and slowed screens that load it, such as an order. Each list is now read on its own.

Portal de clientes

Customer Portal shows customers only what is meant for them

Quotes and invoices read through the Customer Portal no longer include the driver's rating and feedback about the customer's site, or internal links from payments and sent emails back to the full invoice.

Plataforma

Safer text in drop-down lists

Text shown in drop-down option lists is now always displayed as plain text.

Plataforma

Security update for the rich text editor

The library that converts formatted text in the Company Portal's rich text editor was updated to a version with upstream security fixes.

Plataforma

API version 2 refuses request methods it does not support

API version 2 endpoints now refuse request methods they do not support, instead of answering them by sending the request back.

Plataforma

Capturing, voiding and refunding card payments need a signed-in session

Capturing holds, voiding and refunding card payments work only from a signed-in RushHour session, never from an API token, an MCP connection or the in-app assistant. An API token, an MCP connection or the assistant can charge a customer's card, or hold an amount on it, only with the "Charge customer cards" permission, like staff; it cannot save the card it charges, its charge is never marked as a mail or telephone order, and the assistant asks you to confirm before it charges. Each company's payment notifications can only affect that company's own payments, and the Cardknox card form no longer writes the card token to the browser console.

Plataforma

Stronger sign-in protection and tighter access checks

Ten wrong passwords in a row now lock an account for 15 minutes, and completing a password reset ends the lock; sign-in, password reset and one-time codes are also limited per network, with a message that asks you to wait a few minutes. Only a Company Admin can grant or remove the Company Admin role or change an admin's email or roles, and changing a user's roles signs them out of their other sessions. The map type, the map tile address and the Google, Samsara and Ably keys can be changed only by users who can manage integrations. Drivers can no longer change other drivers' hours of service and see only their own logs, and a card payment taken in the driver app must be for an order on the driver's current route. Documents are previewed in an isolated frame and turned into PDFs with scripts and local files switched off, terms and conditions keep their formatting, headings, links and pasted images but nothing that could run code, and two endpoints that needed no sign-in no longer reveal order or customer details.

Plataforma

A suspended company is signed out everywhere

When RushHour suspends a company's account, office staff, drivers and customer portal users who are already signed in are now signed out at their next action, and the Company Portal tells them the account has been suspended. Before, they could keep working until their sign-in expired. Signing in and API tokens were already refused; switching into a suspended company is now refused too, and reactivating the account restores access at once.

Plataforma

Safe renewal of Driver App sign-ins

The Driver App can now renew a driver's sign-in before it expires, so drivers are no longer signed out on day 30. A renewal is refused unless the driver could still sign in: the account must be active and not locked, the driver not blocked or deactivated, the company active, and the sign-in must not have been signed out, replaced, or changed by a new password or a move to another company. Only the Driver App can renew a sign-in, at most 10 times an hour, and renewal stops 180 days after the driver last signed in with a password; after that the driver signs in again.

Pedidos y cotizaciones

Send customers a proof of delivery PDF from an order or delivery stop

Open Proof of Delivery from a booked order's actions menu or a delivery stop's menu on the dispatch board to print, download or email a PDF with arrival and departure times, driver, truck, delivered items and, when captured, GPS location, signature and photos. Turn on Email proof of delivery on completion in Settings → Driver App → Features to send it to the customer when a driver completes a delivery in the driver app. From an order you pick the Billing copy or a Delivery copy, as with the Bill of Lading, and blind stops print blind as they do on the Bill of Lading.

Pedidos y cotizaciones

Share tracking links so customers can follow a shipment on a map without logging in

Turn on Settings → Tracking Links, then copy a link from an order or route menu, or email it from the order's Tracking tab, which also counts opens and lets you revoke it. The page shows your company details and each stop's status on a map, never prices. While the load is moving it adds the next stop's estimated arrival and, as you choose, the truck's approximate area, its live position on the way to the shipment, or only the last completed stop. Links expire after the lifetime you set.

Facturación y contabilidad

Settle driver and carrier pay from a new Payouts page in Accounting

A new Payouts page in Accounting, open to company admins by default, lists the routes you add for each driver and outsource carrier (Generate missing routes adds them for a period), with each route's payout amount, what has been paid and what is still due. Enter route payout amounts and record payments, or group a provider's unpaid routes for a period into a settlement and pay it in full or in part. Print, download or email each settlement's statement, and export a year-end summary of payments per provider to CSV. A period follows the work: a route is listed for the stops its driver did in that period, by your local date, however long ago the route was created. Each settlement covers only its period's stops, at the amount you enter for that period, so the next settlement picks up only the next period's work.

Cumplimiento y seguridad

See every driver's remaining Hours of Service time on one board

A new Hours of Service board shows each active driver's duty status, drive, 14-hour shift and cycle time left, time until their next required break, and today's warnings and violations. It flags who will run out of hours within 2, 4 or 8 hours if their status stays the same, and clicking a driver opens their last 8 days. Open it from Drivers → Compliance or Reports; admins can give other roles access. The board appears while Hours of Service (HOS) is on in Settings → Driver App → Features.

Cumplimiento y seguridad

See and answer driver-reported issues on a new Issues page

A new Issues page, opened from the Drivers page or Reports, lists what drivers report from the driver app, such as truck defects, safety concerns, wrong addresses and missing paperwork. Filter by category, urgency, status, driver, truck or date, see photos and location, reply to the driver and update the status. Settings → Fleet also shows how many open truck issues each truck has.

Plataforma

Email customers automatically when a driver arrives at or leaves a stop

Under Settings → Customer Notifications you can email the customer an order is billed to when the driver arrives at or leaves one of its stops, pick which details each email shows and in what order, and preview it. On a customer's Notifications tab you can override these defaults, choose different recipients and see who will receive the emails. Both emails are off until you switch them on.

Integraciones y mapas

Create API tokens to connect other systems to RushHour

Company admins can now create API tokens under Settings → API Tokens, so another system can use the RushHour API without signing in. Each token acts as the person who created it, with only the roles they pick, and can be set to expire after 7 days up to a year, or never. A token is shown only once, the list shows when each was last used, and any token can be revoked. A token can use AI features only while Allow API tokens to use AI features is on in Settings → AI Usage, which is off by default.

Reportes y análisis

Run 18 built-in reports from a new Reports page and export them to CSV

A new Reports page in the sidebar has 18 built-in reports on revenue, receivables, operations, sales, pricing and costs, such as AR aging and driver productivity. Set dates or options, run a report and export the rows to CSV. Company admins can run them all; other roles can be given the View reports permission, but the money reports also need invoice or expense access and the rest stay admin-only.

Portal de clientes

See each customer's Customer Portal access status and disable access when needed

A customer's status now reflects its Customer Portal access: Open with no portal login, Pending while invites wait to be accepted, and Active once a login can sign in. Existing customers are updated to match, so those without a login show Open. Users with the Delete Customers permission can Disable a customer from its profile, which locks out all its portal logins until someone selects Enable.

Facturación y contabilidad

Invoices flag charges that still need an amount before approval

Charges from a charge type with Enter Amount? ticked and no price per unit now show Amount Pending in the Company Portal's invoice preview and editor instead of a zero amount, and a Billing review required warning appears on the invoice and its order. The Company Portal won't approve the invoice, or take a payment that approves it, until you enter a price for each pending fee, or 0 for a fee you don't charge, in the popup that opens from the warning or from Approve. Credit lines keep their amount, and invoices that are already approved show their amounts and take payments as before.

Facturación y contabilidad

Customers can pay invoices by card from a secure link, without logging in

Approved invoices with a balance due now offer Copy pay link and Send payment link in Accounting, and their emails include a Pay online now link. Your customer pays the balance by card on a secure page without logging in, and the payment is recorded against the invoice. Needs a connected Cardknox account; payment links are on by default and can be turned off in Settings → Billing → Payment links. A link stops taking payments once its invoice is paid or replaced by a newer invoice, and the page tells your customer why.

Plataforma

Branded emails with your logo, and a new page to edit each email's wording

Emails to your customers, drivers and team now use a new layout with your logo, accent colour and contact details. Under Settings → Email Templates, admins can edit each email's subject and content, preview it, send themselves a test or reset it to the default. Branded emails are on by default; turning them off returns to the previous plain format, though emails you have customised keep your wording. Invoice emails print your own payment instructions, for example how to pay by bank transfer. An admin sets them under Settings → Billing → Invoice Payment Instructions; when the field is empty, invoice emails print none. With branded emails off, a subject or content you have not customised is sent in the previous plain format.

Pedidos y cotizaciones

Print BOLs and labels for many orders at once from the Orders list

Tick two or more orders on the Orders list, open the … (Actions) menu at the right of the toolbar and choose Print BOLs & Labels, Print BOLs or Print Labels to print them all in one print job, up to 50 orders at a time. This needs the View BOL permission. The … menu on the Orders and Quotes lists now stays visible, and until two rows are ticked it explains that bulk actions need at least two.

Plataforma

Email each order's tracking link to your customer automatically

Turn on Tracking link emails in Settings → Customer Notifications, with Settings → Tracking Links on, to email each order's tracking link to your customer once, at the step you choose: driver assignment, booking or pickup. By default it goes to the order's contact email, or else to the customer's arrival and departure email addresses. To leave out a customer, choose Don't send on its Notifications tab. Links sent this way stay valid until the order is delivered, for up to a year, and then for the lifetime set in Settings → Tracking Links.

Despacho y rutas

See a past day's routes on the Dispatch board, including completed and archived ones

Pick Yesterday, next to Today and Tomorrow, or any past date on the Dispatch board to see that day's routes, including Completed and Archived ones, with every stop planned, assigned or confirmed that day. The Completed Routes switch starts on for past days; turn it off to see only routes with open stops that day, as before. It needs the Route History permission, and a banner warns that editing these routes can reopen a finished route.

Cumplimiento y seguridad

Choose how long driver GPS history and deleted drivers' details are kept

Settings → Profile has a new Driver data retention section. You can choose how many days of driver GPS history to keep, and whether to erase the personal details of drivers your staff delete once a waiting period has passed. Companies already on RushHour keep how this works today: GPS history older than 90 days is deleted, and drivers your staff delete are erased after a 30-day waiting period, during which they can still be restored. That includes drivers deleted before this release. You can change both here. For companies that join after this release, both start off: a driver your staff deletes stays archived and can be restored, and erasure, once turned on, applies only to drivers deleted from then on. Turning erasure off and on again starts afresh. When drivers delete their own account in the driver app, their details are erased after the waiting period by default, including drivers who asked before this release.

Pedidos y cotizaciones

Record customer work days and shipping and receiving hours, shown on order stops

Customer records now hold work days and separate shipping and receiving hours, set when you create a customer or on its Company information tab. Existing customers start with Monday to Friday, and hours can run past midnight. Pickup stop forms show the customer's shipping hours and delivery stop forms their receiving hours, and hovering the customer name on an order stop shows all their hours.

Integraciones y mapas

Connect your own TollGuru account to add toll costs to priced orders

Add your TollGuru API key under Settings → Integrations, and the tolls on a route are added as a Tolls line when an order is priced. Test connection checks the key without saving it, and the TollGuru card shows whether orders are currently priced with toll costs. The saved key is masked and never shown in full in the browser.

Pedidos y cotizaciones

Company admins can record an order's buying price and see its margin

In the price box of a saved quote or of an order that isn't closed, in both the Old UI and the New UI, company admins can switch between the selling price and the buying price (what you pay whoever hauls the load), enter the buying price with the edit icon and save it straight away. An info icon beside the price shows the line-haul margin: the selling price minus the buying price. Other users don't see the buying price.

Integraciones y mapas

See which invoices and payments didn't reach QuickBooks, and send them again

If your company has connected QuickBooks, a new Sync health tab under Settings → Integrations lists invoices and payments with their export status, attempts and last error, and lets you send them again. If the connection expires or is disconnected, a banner links you to reconnect and your team is notified. Closing that banner hides it for 24 hours in every open tab, for you and the current company only; it comes back at once if the connection breaks again.

Choferes y app de choferes

A company-wide drivers' chat shared by all your drivers and the office

Each company now has one drivers' chat that all of its drivers and the office share. Drivers on the latest driver app see it in their chats, can read and post there, and get notifications once they have opened it. Your team finds it under Inbox → Chat on the All tab once any driver has opened their chats.

Pedidos y cotizaciones

Spot addresses saved under the wrong country on customers and order stops

A warning icon now flags an address that seems to be outside the country it is saved under, such as a New Jersey street address set to another country, which can make an order look international. It appears next to Country in a customer's Company information and on pickup and delivery stop forms, and on an order's stop cards. Hover it for details; nothing is changed automatically.

Despacho y rutas

Keep earlier days' confirmed stops in a route's Confirmation History

A route's Confirmation History can now keep earlier days' confirmed stops. In Settings → Profile → Dispatch route history, keep the last 1 to 365 days or every confirmed stop while the route exists (default: today only). Or set Route history, in the same section or in Settings → Driver App → Preferences, to Until the last stop is confirmed: an open route keeps up to 31 days, and confirming its last open stop in the Portal completes the route, which stays completed unless you choose Continue the route.

Despacho y rutas

See a route's trip history for the dates you pick, with each stop's assigned, confirmed and departure times

Open Trip History from any route card's menu on the Dispatch board, in the New UI and the Old UI, or double-click a route card in the New UI, to see the route's status, truck and driver with their IDs, creation time and stop counts. Each stop shows whether it is a pickup or a delivery, its Pickup # or Delivery #, when it was assigned (for a stop moved to this route from this release on, when it reached this route), when a transfer or hub leg was created, and its planned, arrival, confirmation and departure times, where recorded, and you can filter the stops by order number. The panel opens on the board's date or date range; choose From and To dates, a range of up to 31 days, to see another period, and the Assigned Stops and Confirmed Stops counts cover only stops assigned or confirmed on those dates. Switch to Whole route to see every stop over the route's lifetime, with when the route started. It also shows when the route got its driver and was archived, recorded from this release on. Confirmed stops need the Route History permission. View in Dispatch on a closed order opens the board on the days its stops were confirmed.

Despacho y rutas

Undo a stop on a completed route without reopening it for the driver

When you undo a pickup, delivery or order from the order page or Orders list and its route is already Completed, you can choose Keep Completed: the stop reopens on that route without notifying the driver, and you confirm it again yourself. Give back to driver returns it to the driver as before. Open Completed Route then shows it on the Dispatch board, and users allowed to archive routes can restore it.

Despacho y rutas

Choose whether Assign Transfer also moves an order's other deliveries from the same driver

Turn on Transfer all deliveries from the same driver in Settings → Systems → Order, and Assign Transfer also moves the order's other not-yet-started deliveries on the receiving driver's route through the same transfer point, when their freight comes only from the driver handing over. It is off by default, so only the delivery you pick is transferred and the others can use their own transfer point and date.

Pedidos y cotizaciones

Filter the Orders and Quotes lists to regular or Air/Port orders

You can now filter the Orders and Quotes lists to regular or Air/Port orders, whose stops are in two or more countries, with the Old UI tabs (the Air/Port tab shows a count) or the New UI Shipment Type menu or filter panel. Order Dashboard counts follow your choice. While you create an order or quote, a notice offers to switch it to an Air/Port or regular order when its addresses call for it.

Portal de clientes

Reset a Customer Portal user's password from the Customers list or a customer's page

Company admins can now reset a Customer Portal user's password from the … menu on the Customers list, the new Actions menu on a customer's page or the Customer Portal Access window; the user is signed out and emailed a link to set a new one. These menus also offer Resend invite and Disable or Activate portal access, and Invite to Portal reads Manage portal access once a customer has portal logins.

Despacho y rutas

Plan routes side by side on a new Driver Board in Dispatch

Switch Dispatch to Driver Board, in the New UI or the Old UI, to see the Unassigned panel next to a full-height column for each route you add, and drag stops between them with the same rules and prompts as the regular board. Add routes with the board's + button (an active route, or a driver to create a new route for) or with Add to Board in a route card's menu; the board keeps up to 50 routes for you, and pinned columns stay in view while you scroll sideways. New UI columns show each stop on a compact card with order number, customer, pallets, cities, time, priority and indicator icons, with details on hover, and the Old UI gets a header button that puts the Unassigned panel on the left or the right.

Despacho y rutas

Filter the Dispatch board by route status

A Route Status filter next to the Completed Routes switch on the Dispatch board, in the New UI and the Old UI, shows Active, Pending, Completed or Archived routes in any combination, and clearing it shows every status. Completed covers finished routes. Archived covers routes closed with the older Archive action, which the board used until April 2025, and lists them only for users with the Route History permission. The board opens on Active and Pending, as before, a past day opens with every status, and the switch now turns the Completed and Archived options on or off together. Except on past days, your choice stays in the page address, so a reload or a shared link keeps it.

Despacho y rutas

Filter the Dispatch board by a single day or a date range

The Dispatch board, in the New UI and the Old UI, now has one date control for a single day or a date range. It offers Yesterday, Today and Tomorrow, then this or last week, month or year and All Times, a Single day calendar and a Date range calendar, and arrows that step to the previous or next day or period. The routes, their stops, the Unassigned panel and Driver Board columns follow the chosen dates, a range that has already ended opens the same past-day view as an earlier date, and the dates stay in the page address, so a reload or a shared link opens on them. In the Portal's date range pickers, clicking a single date and then Apply selects just that day, and the Orders list's date filter now also offers Tomorrow.

Despacho y rutas

Ask the AI assistant which route should take an unassigned stop

Order cards in the Dispatch board's Unassigned panel now have Ask AI next to Find Route; in the Old UI list view it is in the card's … menu. It opens the AI assistant on that stop: the assistant ranks the routes that can take it, with the same extra distance Find Route shows, explains its pick and answers follow-up questions, then proposes the assignment on a card that changes nothing until you click Apply. The order then goes on that route with the same checks as Find Route, and Undo is offered if the order had nothing on that route before.

Facturación y contabilidad

Save turns orange when you change something an order's invoice is built from, and blue again once you save

When an order already has an invoice, Save now turns orange after you change something the invoice is built from, with a tooltip saying how the invoice gets updated: by saving, when the order is completed, or with Update Invoice. In the New UI that means the side panel (customer, contact, PO and tracking numbers, shipment type, pricing and attachments), with Edit turning orange in view mode, and in the Old UI also stop changes such as items and allocations. Changes to the order's date or notes don't count, invoices already exported to QuickBooks are never flagged, and for invoices created before this release Save is orange only until the order is saved. Save turns blue again once you click it, even when that save does not rebuild the invoice, and turns orange again only when the order changes after that; the colour is the same for every user and after a reload. While the invoice is still out of date, the tooltip saying how it gets updated stays on Save, even when Save is blue.

Despacho y rutas

New setting: block confirming a delivery until its pickup is on a route

Settings → Profile → Order Info has a new option, Block confirming a delivery until its pickup is on a route, which is off by default. Off keeps today's behaviour: a dispatcher who confirms a delivery whose pickup was never put on a route is warned and can still confirm it, and drivers confirm as before. When it is on, such a delivery can't be confirmed on the Dispatch board, on the order screens, in the driver app or in Telegram until the pickup of its items is assigned to a route, and the disabled Confirm button says why. Closing the order is never blocked.

Facturación y contabilidad

A QuickBooks-style invoice editor and invoice page in the New UI

The new interface has a QuickBooks-style invoice editor and invoice page. Invoices downloaded, printed or emailed from it use a new layout: sender and Bill To side by side, one Items and Fees table, and tax in the totals. In the editor, Set Default asks you to confirm, like Set Default in the order's Invoices list, and it is locked on a new invoice and while the order's default invoice is approved or already sent to QuickBooks or by email. Adding billable waiting time to a new invoice no longer stops it from saving. When an invoice has a line with a negative amount, such as a discount, credit or "Paid" line, which the Invoice total does not count, the invoice page, the editor and the invoices they produce leave out the Subtotal and the Total of the Items or Fees group that holds the line, because those did not add up to the Invoice total. Every line, the tax, the Invoice total and the balance due stay as they were.

Choferes y app de choferes

Driver chat gains reactions, threads, voice messages, calls and secret chats

With the driver app update that adds them, drivers can edit and delete their own messages, react with emoji, reply in threads, add group members and set a group's photo, name and auto-delete, send documents and voice messages, share their live location, reference an order, see link previews, make voice and video calls to other drivers and start secret chats. Secret chats are end-to-end encrypted between drivers, so the office cannot read them.

• Requiere la app de choferes 2.0.20 o posterior

Choferes y app de choferes

@mention drivers and colleagues in driver chats

Office users can now @mention drivers and colleagues in driver chats. A mentioned driver gets a 'mentioned you' notification even if they muted the chat, and a mentioned office user gets a highlighted notification.

Facturación y contabilidad

New setting: leave transfer hubs off invoices with Invoice include Transfer

New setting in Settings → Systems → Order: Invoice include Transfer. It is on by default, so invoices stay exactly as they are. Turn it off to bill each item from its original pickup to its final delivery without the transfer hub's address: transfer legs are combined into one line, fees and waiting time recorded at the hub keep their amount but show no address, and the invoice editor's Fee Address list leaves the transfer stops out. The Fee Address list also names every stop that shares an address.

Pedidos y cotizaciones

New setting: allow one Full Load per order

New company setting in Settings → Profile → Order Info: One Full Load per order. It is off by default: Add Pickup and Full Load stay available as before, and the order screens only show a warning when a Full Load order has another pickup. When it is on, an order with a Full Load pickup cannot take another pickup, and Full Load cannot be chosen next to other pickup items; the order screens disable those buttons and say why, and such a save is refused. Orders that already have more than one pickup keep saving, as long as no pickup is added.

Choferes y app de choferes

Edit, react, reply in threads and send voice messages in the Company Portal's driver chat

Company Portal driver chat: edit your own messages, react with emoji, reply in threads, and send voice messages and order cards. Shared locations, orders and link previews now show as cards. A new info panel lists the members, with who is online, and the photos, files, voice messages and links shared in the chat. Company admins can add drivers to a group from it. Messages can be copied, files downloaded, and text, locations and order cards forwarded to another chat. The inbox list says what a message without text contains.

Despacho y rutas

Choose what the Dispatch board's date applies to, and find a route by its number

Next to the date control on the Dispatch board, in the New UI and the Old UI, a Date applies to menu sets how the selected dates pick routes. Any Stop works as before and stays the default. Route Start lists routes whose first pickup falls on the selected dates (for a route not finished yet, its first pickup still to do). Planned Pickups and Planned Deliveries list routes with a pickup or delivery still to do that is planned by the last selected day, late ones included. Route Lifetime lists the routes that existed on one of the selected days, from when they were created until they were completed or archived, whatever their stops' dates. The menu works while a date is selected, your choice stays in the page address, and the Driver Board columns follow it. Searching the board for a number such as 733 or #733 now also finds the route with that number, and its card shows the route's stops rather than only the orders matching the number.

Plataforma

See your subscription plan and usage, and switch plans, in Settings → Subscription

A new Settings → Subscription page lists the plans your company can choose, each with its monthly price, one-time onboarding fee, included office users, drivers and orders, features and overage prices, and marks your current plan. A company admin moves to another plan by switching it on and confirming; other office users see the page read-only, and free plans say Contact us. The page also shows your usage against the plan's limits and when the monthly order count resets. When about 10% or less of an allowance is left, a counter appears next to New Order, Add Driver and Add User; if your plan enforces its limits, those buttons are disabled once a limit is reached, otherwise nothing is blocked. Profile → Plan Details → Change Plan now opens this page. The counter reads, for example, Order limit reached, update your plan, and opens Settings → Subscription when clicked, and the order counter also shows on the Quotes list. If your plan enforces its limits, Approve Quote, Repeat Order and saving a draft under Orders are also disabled once the monthly order allowance is used up; New Quote stays available because quotes are not counted.

Facturación y contabilidad

Vehicle cost per mile for the fleet and each truck, and an Expenses page for every truck

Settings → Expenses → New Trucks now shows the fleet's vehicle cost per mile (fixed and variable costs, without fuel and tolls) over the last 6 full months, calculated from the truck costs and the Miles entered there; it shows Not available when no miles are entered. In Fleet, each truck's menu has a new Expenses page with that truck's cost per mile next to the fleet's, a month-by-month split that says why a month was or was not counted, and the truck's New Trucks values (month, Finance, Odometer, exclude expenses, save). The Edit Fleet window also has an Expenses tab, and a truck's name on New Trucks opens its page. The figure changes no price unless Classic pricing uses it. Available to users who can view expenses. On New Trucks, values now stay in their own month in every time zone, a typed value no longer shows 0 after you click out of the cell, the grid keeps showing the current values while a month or a save loads, an Exclude Expenses period starts in the month you picked, and the Odometer tab warns when a truck has miles for a month but no fuel entered. Each New Trucks value can now be One-time or Recurring, with an optional end month (new Maintenance, Tolls and Other values start as One-time), and an "All values" window lists every value a truck has had in a column. Approved truck expenses from driver receipts, Transactions, the Recurring tab and imports now count in the month of their date: they show under the cell and are included in the totals and the vehicle cost per mile. Expenses waiting for approval, or rejected, are not counted, and miles come from the Miles column only. A Cost settings tab in Settings → Expenses → Setup sets whether fuel and tolls count in the cost per mile (off by default), where Classic prices take their Vehicle charge from (the Trucks tab by default) and how an order's estimated cost is calculated. Company admins also see an order's estimated truck cost and line-haul margin when hovering over the margin icon in its price box.

Plataforma

A Back button returns to the screen you came from, lists come back as you left them, and you can choose how a clicked record opens

Record screens (orders, quotes, invoices, customers, drivers, outsource companies, the Fleet and Expenses truck pages, Settings → Users → Roles and Permissions, and the document editor) now show a "Back to <screen>" button, such as Back to Dispatch, when you opened them from another screen. It works in step with the browser's Back and Forward buttons, and going back to a list brings back its page, sort and scroll position, plus the filters and search on the Orders, Quotes, Customers, Drivers, Outsource and Invoices lists and the selected route on the Dispatch board. Settings → Systems has a new "Record click opens" option that sets what a normal click on an order, quote, invoice, customer, driver or outsource company in its list does: open it in a new tab in the background (the default, as before; if the record is already open, its tab is shown), in a new tab you switch to right away, or in one reused tab. Ctrl/Cmd-click, a middle click or the new Open in new tab menu item always open a separate tab in the background, and a record you are editing always keeps its own tab. On an invoice, Linked Order opens in the same browser tab, and a new Order Invoices link opens that order's invoices.

Plataforma

Set daily and monthly AI spending limits for your company in Settings → AI Usage

Settings → AI Usage has a new AI spending limits card that shows today's and this month's estimated AI cost against the limit that applies. Company admins can set a daily and a monthly limit in US dollars; your company has no limit of its own until you set one. Once a limit is reached, AI features such as the AI assistant and voice transcription pause until 00:00 UTC for a daily limit, or until the 1st of the next month (UTC) for a monthly one, and the AI assistant shows why instead of leaving your message unanswered. A limit set by your plan or by RushHour can also apply, and the strictest one wins. Requests made with an API token can use AI features only while Allow API tokens to use AI features is on, on the same card; it is off by default, and a company admin can turn it on when your plan allows it.

Plataforma

Starter, Growth and Pro plans include monthly AI credits, and company admins can buy more in Settings → AI Usage

AI features such as the AI assistant now use AI credits. Starter includes 15,000 credits a month, Growth 30,000 and Pro 50,000, and the included credits reset on the 1st of each month (UTC). A new AI credits card in Settings → AI Usage, also shown in Settings → Subscription, shows this month's included, used, purchased and remaining credits. A company admin can buy packs of 1,000, 5,000 or 25,000 credits, paid once through a secure Stripe checkout, at $10 per 1,000 credits on Starter, $9 on Growth and $8 on Pro, plus tax where it applies; where buying online isn't available, the card says to contact RushHour once the credits run low. Purchased credits are used after the month's included credits and never expire. If a pack's payment is refunded or disputed, the credits that the returned amount paid for are removed automatically, but never more than the purchased credits you still have, so credits already used are not taken back. If the refund fails or is canceled, or the dispute ends in RushHour's favour, those credits are returned, and company admins see each change under Recent purchases on the AI credits card. When the credits run out, AI features, including voice transcription, pause until the included credits reset or more are bought, and the AI assistant says why. Settings → Subscription also lists each plan's monthly AI credits and its price for extra credits. AI requests paid with your company's own AI provider key (Bring Your Own Key) use no credits, and a company without a plan, or on a plan without AI credits, has no AI credit limit unless RushHour sets one.

Plataforma

Bookmark any page or filtered view, and reopen it from the top of the sidebar

Click the star beside a page's title to bookmark the page, including the filters you have applied, such as the Dispatch board's date and zone. Bookmarks appear at the top of the sidebar, where you can rename, reorder or remove them, and a saved view with dates keeps them relative to today unless you choose to keep the exact dates. Each user has their own bookmarks in each company, up to 30. A company can turn bookmarks off for all its users in Settings → Systems, which hides the star and the bookmarks without deleting them. Each entry in the Settings menu now also shows an icon.

Plataforma

Buy Starter, Growth or Pro online, starting with a 30-day free trial

Starter, Growth and Pro can now be bought online on rushhourapp.com/pricing, and every plan except Enterprise starts with a 30-day free trial. Starter is $299 a month or $2,699 a year, Growth $599 or $5,399 and Pro $999 or $8,999, plus sales tax or VAT where it applies, calculated at checkout, and each plan includes monthly AI credits: 15,000, 30,000 or 50,000. You enter a card at checkout, but your plan is not charged during the trial; when it ends, the card is charged for your plan, monthly or yearly as you chose. A company admin can cancel any time before the trial ends under Settings → Subscription → Manage billing, and then you pay nothing. The one-time onboarding fee ($299, $599 or $999) is not charged to the card: RushHour invoices it separately after the trial. Checkout runs on Stripe, which sells the plans as the merchant of record through its Link service, so your receipts come from Link. After checkout you finish creating your RushHour account at app.rushhourapp.com with the same email, and your company is active straight away; new companies now sign up this way. Enterprise stays with our sales team. If a subscription bought online later ends unpaid or is canceled (a trial canceled early counts once the trial is over), your office staff can no longer create new quotes and orders; everything else keeps working, including existing quotes and orders. A company admin turns it back on under Settings → Subscription: pay the open invoice in Manage billing, or restart the subscription (charged straight away, with no new trial). Your drivers and customers are never refused, and companies that did not sign up online are not affected at all.

Portal de clientes

Your customers can subscribe to tracking links in the Customer Portal

In the Customer Portal's notification settings, your customers can turn on tracking links to get each order's link by email or in the notification bell, when your company sends tracking links automatically and the Customer Portal role has View Orders from own account (Settings → Roles).

Pedidos y cotizaciones

Full Load orders book extra trucks as sub-orders and keep your item count

On a saved order's Full Load pickup, Quantity of Trucks now sets how many truckloads are booked. Above 1, you can create a sub-order for each extra truck, up to 25 per save, with the same stops, items, charges and price, or continue with one truck; the split is offered only when the Full Load is the order's only pickup item. Quantity of Items stays as you enter it, a Full Load is priced as one truckload whatever its item count, and in the Old UI a Full Load pickup has an Edit Item button. In the order's item editor, and in the Old UI also while confirming a stop, the [+] next to Quantity of Trucks is disabled on a Full Load item that is already saved, though you can still type a number; to keep the [+], turn on Allow [+] on Quantity of trucks for saved Full Load items under Settings → Profile → Order Info → Production behaviour options. When a customer changes the Quantity of Trucks of a Full Load in the Customer Portal, the quote stays one quote with that number of trucks, unless you turn on Split a customer's Full Load into one quote per truck in the same place; the Customer Portal then asks the customer whether to create one quote per truck or keep 1 truck.

Despacho y rutas

Orders too big for one route are flagged, and routes with room are listed first

On the Dispatch board, an unassigned order with more stops than your Max Route Addresses setting allows now shows Increase Limit, and one needing more pallets than a truck carries shows Over truck capacity, each with a tooltip on what to change. Find Route (previously Auto Reroute) is disabled for those orders. When you select an unassigned order, routes that still have room for all of it are listed first.

Pedidos y cotizaciones

Order Log Activity tab records document downloads, BOL emails and details sent to drivers

The Audit log tab on orders and quotes is now called Log Activity. On an order, it now records when its Bill of Lading, labels or invoice PDF is downloaded, who a BOL was emailed to, and when order or stop details are copied or sent with Copy to Driver, naming the driver. Invoice rows now also show who the invoice was sent to, and users who can edit invoices can add notes to them.

Plataforma

A shorter sidebar, with Customers (CRM) and Inbox opening from the header

Customers (CRM) and Inbox now open from the header instead of the sidebar. The people icon opens Customers and shows how many customers your team has not viewed yet, and the inbox icon opens Inbox. The new Issues and Compliance pages open from buttons on the Drivers page and from Reports, with Compliance shown when Hours of Service is turned on in Settings → Driver App.

Integraciones y mapas

Integrations now open on an Installed tab, with everything available under All

Settings → Integrations now opens on the Installed tab, which lists only the integrations your company has set up, while the All tab shows everything available. A QuickBooks connection that has expired or still needs authorising stays on Installed with its Reconnect or Connect button, and the Map Provider row appears on both tabs. Telegram, whose connection RushHour can't check, is listed on both tabs.

Facturación y contabilidad

Pick an invoice fee address from the order's stops or type any address

The Fee Address field on invoice fees now lists the linked order's pickup and delivery addresses, labelled Pickup #1, Delivery #1 and so on, followed by any stops a transfer added, labelled Pickup From Transfer #1 and Delivery To Transfer #1. You can still type or paste any other address, and it is kept when you press Enter or Tab or click away. If what you type matches one of the listed stops, that stop's address is used.

Facturación y contabilidad

Invoice waiting time fills in the stop's recorded arrival and departure

In an invoice's Add Waiting Time window, choosing a stop in the Select Customer list now fills in the arrival and departure times already recorded for that stop, and the waiting time and any fee update to match. Any time the stop has not recorded is left blank. The same happens when you switch stops while editing an existing waiting-time line.

Facturación y contabilidad

Invoice fees show Qty and Item Cost with Fee Cost calculated from them, and quantities can include a fraction

In the invoice preview and editor, each fee now has Qty and Item Cost columns before Fee Cost. Choosing a fee type fills in its quantity and price per unit, and changing either one recalculates the Fee Cost; a waiting-time fee shows its billable hours and hourly rate. You can still type a Fee Cost directly, and in the items table Qty now sits next to Item Cost. A fee's Qty can include a fraction, to two decimals: a fee of 2.5 units, or 1.5 hours of waiting time, is billed and printed as 2.5 or 1.5, and QuickBooks receives the same quantity. An item's Qty can include a fraction too, for example 1.5 hours. The line's total is then rounded to the cent: 1.5 at $6.67 each is billed as $10.01, and the invoice editor and preview, the invoice total and balance, invoice PDFs and QuickBooks all use that rounded amount. Items with a whole-number Qty are billed exactly as before.

Facturación y contabilidad

Invoices show the order price under Items, with separate totals and any balance due

The order price now shows under Items, not Fees, in the Accounting invoice preview and editor and in invoices you print, download or email, including Customer Portal prints. In the preview and PDF, the items Total includes the order price and additional charges have their own Total. The PDF's Invoice Total shows the full amount, with Paid and Balance Due lines once a payment is recorded; amounts show two decimals.

Pedidos y cotizaciones

Appointment emails typed on an order stop are saved to the customer for next time

When a stop's customer has no appointment email yet, the address you type in Email Address for appointment on a pickup or delivery is now saved to that customer and fills in on their next stop. If the customer already has that address under another email type, you choose Save or Use once. Customers that already have an appointment email keep it, and saving needs permission to edit customers.

Despacho y rutas

One Country & Zone filter on the Dispatch board, with zone and outsource company lists that follow the country

On the Dispatch board, in the New UI and the Old UI, the Country and Zone filters now share one Country & Zone button in the header. The button shows the selected country and zone, and Clear All resets both at once. The Zone filter and the Zone field in the New Route and Edit Route windows now list only zones in the selected country, with zones that have no country treated as your company's country. In the New UI, those windows also list only outsource companies with an address in that country. Changing the country clears a Zone filter set to another country's zone.

Pedidos y cotizaciones

International orders show each country's route and distance on the order map

Once a cross-border order's hubs are assigned, the order page map draws a separate route in each country, such as pickup to hub and hub to delivery, following roads where possible. No line joins stops in different countries, and hovering a line shows its distance. Add Location, in the New and Old UI, now lists the stops still needing a hub, and you can change a pair's hubs before clicking Done. The map now opens on the first pickup and its first leg.

Choferes y app de choferes

Drivers can keep messaging in a route's chat after the route is completed

In driver app 2.0.4 and later, a completed route's chat still moves to Archived Routes but now stays open, so drivers can follow up on things like a missing signature or a damaged pallet. This also applies to routes completed before this release. Your team sees these messages in the route's conversation under Inbox → Chat → Routes and can reply there.

Despacho y rutas

Route confirmation history shows stops on the day they were confirmed

On the Dispatch board, a route's Confirmation History (History in the Old UI) now places each confirmed stop on the day it was confirmed, or the day its confirmation was last updated, in your local time zone, instead of the day it was planned for. It lists stops planned or confirmed within the dates selected on the board. Route planning still goes by each stop's planned day.

Despacho y rutas

Assign both ends of a hub leg to the same driver, and see drivers by the stop's country

When you assign a driver to a stop on an order routed through a hub, the Portal now offers to give the stop at the other end of that hub leg to the same driver, or says when the route has no room for it. The driver list also offers Show only this stop's country, kept for later stop assignments until you choose Show all countries, and the Outside order country badge now checks the stop being assigned.

Facturación y contabilidad

Sending to QuickBooks skips invoices you already exported for QuickBooks Desktop

With QuickBooks connected, invoices you already exported to a file for QuickBooks Desktop are no longer sent by automatic export or the AI assistant, so they aren't entered twice. Send QB, and Retry now on the Sync health tab, ask before sending one: Send anyway sends that invoice, and Don't send leaves it out. Cancel QB on such an invoice checks QuickBooks for a matching import; if none is found and the invoice was never edited after that export, you can send it without being asked. The Sync health tab marks held invoices.

Facturación y contabilidad

Check QuickBooks again for an invoice held because it was exported for QuickBooks Desktop

An invoice held for review because you exported it to a file for QuickBooks Desktop now has a recheck button on the Sync health tab of the QuickBooks integration, once QuickBooks is connected. It looks for the invoice in QuickBooks without sending or changing anything there: if QuickBooks has it, the invoice stays held; if it doesn't, you can send it with Send QB. Invoices edited after that export stay held.

Facturación y contabilidad

The Accounting button for QuickBooks Desktop files is now called QuickBooks export

In Accounting, in the New UI and the Old UI, the button that downloads the selected invoices as a file for QuickBooks Desktop is now labelled QuickBooks export, and hovering it shows Export a file for QuickBooks Desktop. On the Documents page, each copy of that file saved from now on shows Generated from QuickBooks export with its number; copies saved earlier keep their original description. The QuickBooks features new in this release use the same name, including the Send QB question before sending an invoice you already exported this way, what Send QB, Cancel QB and the AI assistant tell you about such an invoice, the Sync health tab of the QuickBooks integration with its Recheck QuickBooks import button, and the QuickBooks connection alert. The file you download and how you import it into QuickBooks Desktop don't change.

Plataforma

ZIP codes fill in automatically when you pick a city or a street address

Picking a city on customer, contact, driver, outsource carrier and user address forms, or in Settings → Profile, now fills in the ZIP code when a suitable one is known for that city; you can still pick or type another. Changing the city replaces or clears only a ZIP filled in this way, never one you entered or saved. In Settings → Locations, picking a suggested street address fills in its ZIP code when one is found.

Plataforma

The About page shows release dates and explains health checks that need attention

Settings → About now shows when the running API and Portal versions were released, and how long ago. Any system health check that reports a problem gets an info button explaining what it affects, the likely causes and what to do next. The Maps and Payments checks also no longer report a problem while those services are working normally. The Tolls row now reflects your company: it shows "Uses your company's own key" when you have added your own toll key, "Off: tolls are not priced" when no toll key is set up, and the result of the shared toll key's check when your company's tolls use that key.

Confiabilidad y rendimiento

The AI Knowledge window loads faster for long lists of learned rules

The AI Knowledge window on the Documents page now loads faster when the AI has learned hundreds of pricing rules or document layouts. Lane rate, accessorial rate and custom rule entries are also labelled by name on each rule and in the filter list, in English and Hebrew.

Plataforma

Continue straight into the Portal after replacing a temporary password

When someone signs in with a temporary password and the Portal asks them to choose a new one, saving it now signs them in with the new password and takes them straight to the page they were opening. They no longer have to sign in a second time.

Pedidos y cotizaciones

Turn off the duplicate item-name check to let items on a stop share a name

Validate unique item names under Settings → Systems → Order is on for every company, so the order item forms and stop confirmation keep rejecting a repeated item name on the same stop, as before. Turn it off to let items on the same stop share a name.

Pedidos y cotizaciones

Select text in Copy to Driver, and see the option only when a stop is left to send

In the Copy to Driver window you can now highlight part of a stop's details, such as a phone number or address, and still drag the cards to reorder them. On an order, Copy to Driver in the actions menu and in a stop's menu now appears only while a driver is assigned and there is a stop not yet completed, and completed stops are left out of the window. To keep Copy to Driver in a completed stop's own menu, with that stop's details, turn on Allow Copy to Driver on completed stops under Settings → Profile → Order Info → Production behaviour options; the order's actions menu works the same either way.

Facturación y contabilidad

Customer Additional Charges tab now shows each charge's price per unit

Open a customer and go to Additional Charges to see a new Price per unit column: the price each of that customer's charges uses by default, formatted the same way as in Settings → Charge Types. The column stays blank when no price is set.

Pedidos y cotizaciones

Stops with driver instructions are flagged in the stop card header

In an order, a pickup or delivery stop with driver instructions now shows a green marker in its card header, next to any other stop warnings. Click it to read the instructions, or to edit them while the order can still be changed. Driver instructions no longer have their own info icon beside the address, where a single icon now shows the location details.

Despacho y rutas

Use search and the stop type filter together in the Unassigned panel

On the Dispatch board, opening search in the Unassigned panel no longer hides the stop type filter. The search box takes the top row and the filter sits directly below it, so you can switch between Pickup & Delivery, Pickup, Delivery and Warehouse stops while a search is active.

Facturación y contabilidad

New companies start with invoices created when an order is completed

Companies set up from this release on start with Create Invoices set to Order was completed, so an invoice is created once the order is done instead of as soon as the order is entered. Existing companies keep their current setting, and you can change it any time under Settings → Billing.

Despacho y rutas

The route suggestion action on unassigned orders is now called Find Route

On the Dispatch board, the action on order cards in the Unassigned panel that opens Add to a route is now called Find Route instead of Auto Reroute, in English and Hebrew. Add to a route ranks the routes that could take the order's stop. In list view the action is in the card's … menu. The Auto Reroute option that re-orders a whole route keeps its name.

Pedidos y cotizaciones

A more compact header and filter row on the Old UI Orders and Quotes lists

The Old UI Orders and Quotes lists have a more compact header and filter row, each sized to fit one line on a typical laptop screen. Filters, Customers, Drivers, From and To show a count, and each picked customer, driver or address is a removable chip below; on orders, Unbilled and Show only unread share one dropdown. New Air/Port Order or Quote now opens from the arrow beside New Order or New Quote.

Despacho y rutas

Late stops are optimized and listed together with today's stops

Reroute, including Optimize with AI, now orders open stops from days that have already passed together with today's stops, instead of oldest day first, and stops planned for later days still come after today's. On the Dispatch board those late stops are listed with today's: in the Old UI the heading reads Today + late stops and each late stop shows the day it was planned for in red, and in the New UI each card still shows its own date, with a divider marking where a later day begins. Optimizing or reordering doesn't change their dates; use Edit Date to reschedule one. Today means your own day, in your computer's time zone.

Plataforma

Export your whole customer list, however large

Company admins can now export every customer from Customers → Export/Import CSV → Export, however many there are. With no customers selected, the list is downloaded in parts with a progress bar counting the customers done, a part that times out is tried again, and everything is joined into one CSV file; Cancel stops the export without saving anything. An export of more than 20,000 customers used to be refused. Exporting selected customers works as before.

Pedidos y cotizaciones

Search the Orders and Quotes lists by a stop's Reference Number

Searching the Orders or Quotes list now also finds orders and quotes by the Reference Number entered on any of their pickup or delivery stops, including part of the number, alongside the order, PO and tracking numbers, customer names and addresses it already matched.

Facturación y contabilidad

Send QB shows whether QuickBooks sending is Manual or Automatic

In Accounting, the Send QB tooltip now also says how your company sends invoices to QuickBooks, as set under Send to QuickBooks in Settings → Billing: in Manual mode an invoice is sent right after the click, and in Automatic mode invoices are sent on their own. In Automatic mode the button looks inactive but still works: clicking it asks Send now anyway? with the number of selected invoices, and nothing is sent unless you choose Proceed. This works the same in the New UI and the Old UI.

Plataforma

Choose enabled currencies from a checklist in Settings → Profile

In Settings → Profile → Currencies, the Enabled Currencies box now shows the currencies you chose as chips inside the box and opens a list with a checkbox for each supported currency, which also works from the keyboard. USD stays on and can't be removed, as before.

Choferes y app de choferes

The driver invitation page explains what to do when Open App can't open the app

On a computer, Open App on the page a driver reaches from their invitation email now explains that the invitation should be opened on a phone, or that the driver can install the RushHour driver app, tap Enter Invite Code and enter the code shown, with Open the app anyway still available. On a phone, if the app hasn't opened after about two seconds, the page explains how to get in: install or update the app, then tap Enter Invite Code and paste the code.

Despacho y rutas

A warning when one driver gets an order's stops in two countries

When you assign stops of an international order on the Dispatch board and the driver now has stops of that order in more than one country, on this route or another of their routes, a "One driver, more than one country" message names the driver, the order and the countries. The assignment is saved as usual: one driver may cross the border, and the message is a reminder to check that they can. This works in the New UI and the Old UI.

Despacho y rutas

Selecting a route on the Dispatch board zooms the map to where the route starts

When you select a route on the Dispatch board, the map now frames it the same way in the New UI and the Old UI. A route with only pickups or only deliveries is centred on its first stop. A route with both is fitted around its first pickup and the next three stops when they are close together, or centred on the first pickup when they are spread over more than about 30 miles. Before, the New UI always fitted the whole route, and the Old UI did so unless its stops spread over more than about 30 miles. Once you zoom in, nearby stops of a selected route or order show as separate numbered pins instead of one cluster dot, while stops at the same location still share one counted dot.

Despacho y rutas

Find Route and Ask AI suggest every route that can take an unassigned stop

Find Route and Ask AI now suggest every route that can take an unassigned stop, including routes with only late stops, routes that work on other days and routes with no stops yet, and say what each distance means.

Pedidos y cotizaciones

The Map Link field accepts a plain address and shows both addresses before replacing one

The Map Link field on a customer address now also accepts a plain address or a map link that only names a place, and before replacing an address it shows the current and new address side by side.

Pedidos y cotizaciones

Confirming a delivery explains hidden transfer stops and offers to show them

On an order whose transfer stops are hidden (Show Transfer cards off), clicking Delivered on a delivery stop while a transfer leg is still unconfirmed now explains why it cannot be confirmed yet: "Order has hidden Transfer stops that need to be confirmed first." Show Transfers turns Show Transfer cards on for that order and reloads it so the transfer stops appear; Cancel closes the message. This works in order details in the New UI and the Old UI.

Plataforma

The header search filters more lists, and opens Global Search on pages without a list

The search bar at the top of the Company Portal now filters more lists: Payments Received, Expenses (including each truck's expense ledger), Truck Types, FX rates, Pricing Zones and Portal Access Requests. On pages without a list it opens Global Search. You can also type several words, such as a driver's name and a truck's name on the Dispatch board: the Dispatch board, Orders, Quotes, Customers, Drivers, Fleet, Locations, Zones, Outsource, and Accounting's customer list and its invoices and payments list then also show what matches every word, in any order and across different fields.

Pedidos y cotizaciones

The pickup and delivery card on the new order screen starts with the address

The pickup and delivery card on the new order screen now opens with the address, laid out as in the classic stop window: Address and Zip Code first, then Address 2 and Country. Company Name, Reference Number and the date and time follow below the driver instructions. Every field is still there, and none of them got narrower.

Pedidos y cotizaciones

Order Log Activity also records repeat orders, files, driver instructions, appointments, COD and invites

The Log Activity tab on orders and quotes now also records Repeat Order, an order reverted to a quote, files attached or removed, driver instructions, appointment requests, COD changes, and Cardknox and Client Portal invites, each with who did it and when.

Despacho y rutas

Routes at their stop limit now block more stops up front

When a route holds as many stops as Max Route Addresses allows (Settings → Profile), or more after you lower that limit, the + button on its Dispatch board card is disabled. Its expanded stop list refuses stops dragged in from other routes or the unassigned list, while re-ordering its own stops still works. Order screens no longer let you assign an order to a route marked Full.

Despacho y rutas

Unassigning a stop or deleting a delivery removes its transfer from both drivers' routes

If a pickup or delivery has a transfer, unassigning it without recording an attempt, or deleting the delivery, takes the transfer's stops off both drivers' routes, even while the order's other stops stay assigned. Unassign on the Dispatch board, which refreshes all routes, or on the order screen; deleting warns first. A transfer a driver has started is kept, and deleting tells you to finish or remove it on the board. To keep the transfer when you unassign one stop while the order's other stop is still assigned, as before, turn on Keep the transfer while the order's other stop is still assigned under Settings → Profile → Order Info → Production behaviour options; it is then removed when the last of those stops is unassigned, and deleting a delivery still removes it.

Facturación y contabilidad

Accounting stays on the customer you last selected

On the Accounting page, the customer header, balance and invoice list now stay on the customer you last clicked, even if you switch before the previous one finishes loading. Searching or paging the customer list no longer reloads the customer on screen, and results appear as soon as they load. Customer search boxes in Accounting and Settings → Pricing Models show only matches for what you typed.

Despacho y rutas

Stop warnings on an order's other route now update without a page reload

On the dispatch board, when you drop an unassigned stop onto a route's expanded stop list, assign it with Find Route, or drag a stop back to the unassigned list, any other expanded route holding a stop of the same order now refreshes too. Warnings such as Assign Delivery clear or reappear right away, without reloading the page.

Despacho y rutas

Stop confirmation reopens with the arrival and departure times you saved

When you reopen the confirmation window for a pickup or delivery whose arrival and departure times were already saved, for example with Update, it now shows those times exactly as they were entered, whatever your computer's time zone. Saving again with Update or Confirm keeps them unchanged. This works from the dispatch board and from an order's stops.

Despacho y rutas

Dispatch map pins every stop on a route, even when the route line is incomplete

When a route's driving directions are missing or cover only some of its stops, the dispatch board map now pins the remaining stops from their saved addresses, so selecting the route shows all of them. A stop can only be pinned if its address has a map location.

Despacho y rutas

Route stop cards show only the items on that driver's route

When an order's items are split between drivers, each driver's stop card on the Dispatch board now lists only the items on that driver's route, with that route's quantities. This covers both the item badges on the card and the View items list.

Pedidos y cotizaciones

Click an order or quote number to edit it, with a check for numbers in use as you type

For users who can edit orders or quotes, clicking the number at the top of an order or quote page in the New UI now opens it for editing, ready to save. The number is checked as you type: the box turns green when it is free and red when another order already uses it. In both UIs, after a save is rejected for a duplicate number, saving again with a free number now clears the red warning.

Pedidos y cotizaciones

Labels print on one page each, with long ship-to addresses sized to fit

Each label printed from an order now fits on a single page, without a near-empty extra page or a blank label at the end. A long ship-to address or label note prints in a smaller font so it fits, and only very long text is shortened. When your Bill of Lading has no terms and conditions text, it no longer ends with the load number alone on an extra page.

Despacho y rutas

Order-number searches on the dispatch board show only matching routes

Searching the dispatch board for an order number, with or without a leading #, now shows only the routes that carry a matching order. Empty route cards no longer appear just because a route's name, truck or driver contains the same digits. Searches that include letters, such as a driver's name or a plate number, work as before. To also find a route whose name, truck name or plate contains the digits, as before, turn on Also find routes by route name, truck name and plate under Settings → Profile → Order Info → Production behaviour options; such a route then lists all its stops.

Despacho y rutas

Pickups list each item once when an order with several deliveries is added to a route

When an order with one pickup and several deliveries is added to a route, for example with Find Route on the dispatch board, each item now goes on the pickup once with its full quantity, so the pickup confirmation lists every item once. The same applies to a delivery fed by several pickups. On pickups that already list an item twice, the repeated line keeps its quantity when the order is saved.

Confiabilidad y rendimiento

The Select Customers filter and the Order Dashboard counts load reliably

The Select Customers filter on the Orders and Quotes lists now loads its customer list reliably, even for companies with many customers and orders. This applies to both the classic list and the New UI filter panel. The Order Dashboard counts at the top of the Orders page also appear as soon as the page opens again, in both UIs; since September 7, 2026 they had stayed empty until you changed a filter.

Choferes y app de choferes

Driver locations from version 1 of the driver app now reach the Company Portal

Drivers using version 1 of the driver app now send their location to the Company Portal, with no app update needed. It feeds stop arrival estimates and driver distance on the Dispatch board, the distance beside each driver in an order's side panel, the GPS location on proof of delivery PDFs, and the truck's location and arrival estimate on tracking links.

Choferes y app de choferes

After each stop, the driver app shows the next stop instead of "Route complete!"

When a driver completes a stop, the driver app's Task Completed screen now shows the next open stop with its address and estimated arrival, or the driver and truck to meet for a transfer. It no longer says "Route complete!" while stops are still open on the route. No app update is needed.

Facturación y contabilidad

COD payment requests and Accept Payments invites reach the right customer address

A delivery stop's COD email now defaults to the paying stop customer, preferring its Accept Payment or Cardknox email, or to the stop contact if the stop's customer is the billing customer, whose payment emails stay listed. Request Payment, offered once the billing customer has Cardknox set up, uses the same default. Accept Payments invites go to the customer's Cardknox, else Accounting, email and explain how payments reach its own account.

Despacho y rutas

Routes with an unlinked transfer stop now show their stops on the Dispatch board

A route with a transfer drop-off or collection stop that is no longer linked to its transfer now shows its stops when you expand its card on the Dispatch board, instead of none. If a route's stops can't be loaded, the card now says so and offers Retry instead of looking empty, and if loading more stops fails, the stops already shown stay on screen. When only some of a route's stops can't be read, the card now shows the others with a note that some stops are not shown.

Despacho y rutas

Confirming or updating a stop keeps the files already attached to it

When you confirm or update a pickup or delivery from the dispatch board or an order, the files already attached to the stop now stay attached as long as you leave them unchanged. The confirmation window's Attachments section also stays in view when you click Confirm or Update.

Despacho y rutas

Assign Transfer moves the right quantities when a load is split across delivery stops

When the freight one driver hands over is split across several of the receiving driver's delivery stops, Assign Transfer now moves the right quantity for each delivery it covers: the hub drop-off and collection match, and every delivery keeps its own items and route. If the driver handing over has none of that delivery's freight left, you're told to transfer it from the driver who is carrying it.

Facturación y contabilidad

Free waiting time follows each order's price type, including pallet ranges

Waiting-time charges on orders and invoices now use the free time set in Settings → Billing → Waiting Time for the order's price type: Classic, Custom, or the Pallets (Pricing Model) range that fits the pallets picked up on the order. Stop confirmation and an invoice's Add Waiting Time window suggest the same free time. If Custom or Pallets is left blank, or no range fits, the Classic value is used.

Plataforma

Checkboxes and switches display correctly in dark theme and in Hebrew

In dark theme, unticked checkboxes, radio buttons and switches across the Company Portal now use a dark background with a clearly visible border instead of plain white, and a switch that is off now shows its handle. In the Hebrew interface, most on/off switches no longer leave extra empty space beside them.

Pedidos y cotizaciones

Opening an order or quote now marks it as read

Opening an order or quote now reliably marks it as read, whichever order screen you use, and the unread count next to Orders or Quotes in the main menu updates right away. Each unread order or quote is counted once in that menu count.

Pedidos y cotizaciones

Stop menus show BOL and Copy to Driver right after you save or create an order

On the order page, the BOL action on delivery stops and the Copy to Driver action on assigned stops that are not yet completed now appear in the stop's menu as soon as you save or create an order, without reloading the page.

Pedidos y cotizaciones

Drag items onto any delivery stop, between deliveries and back to their pickup in the order editor

In the New UI order editor, you can now drag an item from a pickup onto any delivery stop's Drop Items Here area, and the item is added to that delivery. This now works for the second and later deliveries too, and for a delivery that has no items yet. You can also drag an item off a delivery onto another delivery, or back onto the pickup it comes from, which leaves that amount unassigned again. When the order has more than one delivery and more than one item, a window asks how many to move. Items that pass through a hub or a transfer stay on their delivery.

Choferes y app de choferes

Route driver pickers show only details from your driver records

When you choose a driver from a route card on the Dispatch board or in the New Route and Edit Route windows, the list shows only details from your driver records, such as each driver's name and rating. Shift hours, trip counts and distances are no longer shown there, as they are not part of your driver records.

Facturación y contabilidad

Save options for a new invoice charge type show each stop's customer name

When you create a new charge type while editing an invoice, every pickup and delivery save option (Pickup #1, Delivery #1 and so on) now shows the name of that stop's customer after its label, instead of the location name. If a customer's name can't be loaded, the option shows just the stop label.

Facturación y contabilidad

Accounting's Filter view now loads after a page reload or from a bookmark

Opening Accounting straight into its Filter view, whether from a page reload, a bookmarked link or after switching between the old and new interface, now loads the list of invoices and payments instead of staying on a loading spinner. Switching between the Customer and Filter views also no longer reloads the list a second time.

Pedidos y cotizaciones

Set HOLD is offered only on orders that have a delivery stop

A hold applies to delivery stops, so orders with no delivery stop, such as pickup-only orders, no longer show Set HOLD in the orders list or on the order page. When you put several selected orders on hold at once, those orders are skipped and the message says so. If one of them already carries a hold, its order page shows View HOLD Details and Resolve HOLD so the hold can be released.

Pedidos y cotizaciones

The + button in Confirm Delivery stops at the picked-up total on split deliveries

When one pickup is split across several deliveries, the + button in the Confirm Delivery window now stops once the deliveries together reach the quantity picked up. Opening the window from a delivery stop's Delivered option on the order page now follows the same limit as Dispatch.

Choferes y app de choferes

Chat messages show the sender's photo as soon as they arrive

In driver app version 2.x, new chat messages now show the sender's profile photo as soon as they arrive, instead of initials until the chat is reopened. In the Portal Inbox, new messages from other team members do the same, and route conversations in the conversation list now show who sent the latest message.

Integraciones y mapas

Fleet list shows Samsara location, vehicle name and VIN for linked trucks

With your Samsara account connected under Settings → Integrations, each truck linked to a Samsara vehicle now shows that vehicle's current location, name and VIN in the Settings → Fleet list.

Pedidos y cotizaciones

Undoing a stop only asks about related stops that are still confirmed

When you choose Undo Pickup or Undo Delivery on an order stop, the confirmation window now appears only if a related stop is still confirmed, and it lists only those stops. If none of them is still confirmed, for example because you already undid them, the stop you picked is undone straight away.

Despacho y rutas

Route cards keep an accurate load bar after you assign or unassign stops

The load bar on dispatch board route cards, and the vehicle capacity count beside it, now update correctly each time you assign or unassign a stop. The load is counted across the whole route, not only the stops your current search or date filter shows.

Pedidos y cotizaciones

Orders list shows hub and transfer stops in the order the freight travels

On the Orders list, an order split into two legs, through a hub or a transfer between routes, now shows its stop markers in the order the freight travels: pickup, drop-off at the hub or transfer point, collection for the second leg, then final delivery. Hovering a stop marker also keeps its details open without the popup flickering.

Pedidos y cotizaciones

Deleting an order's stop in another country clears the two-driver and hub notices

When you delete an order's stop in another country, or a stop flagged Assign HUB, any Assign HUB warning tied to it now clears as soon as the stop is deleted. Once the remaining stops are in one country and none still needs a hub, the notice asking you to assign the stops to separate drivers goes away too, and the order-level Assign Driver button is available again.

Pedidos y cotizaciones

Assigning a hub no longer adds a customer named after the warehouse

Saving an order after you assign it a hub no longer adds a prospect customer named after the hub's warehouse, and the hub stop keeps the warehouse's saved address. If you then change that hub stop's address in the order, only that stop gets the new address: the warehouse's address in Settings → Locations, and on other hub stops that use it, stays the same. Customers already created this way, and hub stops already moved onto their addresses, are left as they are.

Pedidos y cotizaciones

Searching by the text the address picker shows finds the saved address again

On an order's pickup and delivery stops, the Address picker lists saved addresses in a shortened form, such as 7513 147Th St, Queens, NY for a saved 75-13 147th St, and keeps that text in the box after you pick one. Searching with that text, or editing it, now finds the saved address, and so does typing the street without its punctuation, such as 7513 147th. Before, a dash or other punctuation in the saved street meant no saved address matched, and only map suggestions came back, which could point to unrelated places. When the box holds exactly the text of a saved address, as it does after you pick one, the picker shows that saved address without adding map suggestions; after you edit the text, map suggestions can still appear alongside it.

Plataforma

When an address can't be saved, the message now says why

When a customer's or outsource carrier's address can't be saved, for example after you change the Company Location in a customer's Company information, the error now gives the reason instead of only Address validation failed, such as that the customer already has a location with that address or with that title, or that the address is missing. The reason appears in the language you use the Portal in, English or Hebrew.

Despacho y rutas

The Add Pickup and Add Delivery window uses its full width in Safari

The window for adding unassigned pickups and deliveries to a route now shows one full-width, column-aligned line per stop in Safari on wide screens, as in other browsers. It opens from a route's + button on the Old UI dispatch board and from an order stop's Assign Pickup or Assign Delivery warning. Stops with no date or time set now read None instead of an empty label.

Plataforma

Text editor toolbars are easier to read in dark theme and lay out correctly in Hebrew

The formatting toolbar in Settings → Terms & Conditions and in the new Settings → Email Templates editor now shows its buttons, menus, link box and placeholder text clearly in dark theme. In Hebrew, the toolbar uses the same compact spacing as in English, and the text size and heading menus show their arrow beside the label instead of over it.

Facturación y contabilidad

The Order Invoices view in Accounting shows how often each invoice was downloaded

In Accounting, the Order Invoices view, opened from Order Invoices in an invoice's menu or the View All Invoices icon, now shows a download count on each downloaded invoice, as the main invoice list already does. Hover the download icon to see how many times it was downloaded and when it was last downloaded, including for invoices edited after they were downloaded.

Pedidos y cotizaciones

Item sizes print once on Bills of Lading, quotes and order sheets

On Bills of Lading, quote PDFs and order sheets, each item's size now prints once, on the line under the item name. It is followed by the pallet size's dimensions when a pallet size is chosen, then any dimensions entered on the item. The weight column now shows only the weight.

Despacho y rutas

Copy to Driver and the Dispatch board header are now easier to use on tablets

On a tablet, a swipe now scrolls the stop list in the Copy to Driver window, and you reorder stops by dragging each card's handle; with a mouse you can still drag a card from anywhere outside its text. The Dispatch board header also fits tablet screens: in the New UI its controls sit on their own row below the header icons and wrap when needed, with every button label kept.

Despacho y rutas

Moving a stop to the other half of its transfer now asks for one confirmation

On the Dispatch board, dragging an order's last pickup or delivery off a route where only its transfer would remain, onto the route with the transfer's other half, now shows one confirmation to delete the transfer or HUB hand-off, not the Route Transfer Confirmation window. Confirming moves the stop and removes the transfer from both routes. The move is refused once part of the transfer is confirmed or already in progress with the driver.

Despacho y rutas

Rearranging a route keeps the driver and truck on its confirmed stops

When you add, move or reorder stops on a route after changing its driver or truck, the stops already confirmed on it now keep the driver and truck recorded for them instead of taking on the route's new ones.

Plataforma

The Settings menu keeps its place when you open an entry

When you pick an entry further down the Settings menu, the menu now stays where you scrolled it instead of jumping back to the top, and keeps the selected entry in view. Opening Settings from another page starts the menu at the top, and if you land on a Settings page further down, for example from a direct link, the menu scrolls to show that entry.

Pedidos y cotizaciones

The Related Orders tab shows how many sub-orders an order has

When an order has sub-orders, the Related Orders tab on the order page in the New UI now shows how many there are. The Old UI already showed this count.

Pedidos y cotizaciones

Documents print a stop's time in your time zone instead of UTC

Bills of lading, quotes, invoices and proof of delivery documents that you open or email from the Company Portal now print a stop's exact time in your computer's time zone, with its UTC offset shown, instead of in UTC, so a time entered in your zone prints as you entered it, and the date next to it follows the same zone. A 7:00 PM pickup in New York used to print as 11:00 PM. Stops set to Morning, Noon or Evening print as before.

Despacho y rutas

Expanded route cards keep each day's stops together

On the Dispatch board, when an expanded route card loads more stops and some of a day's stops arrive in the next batch, they now join that day: the Old UI shows the day's heading once instead of twice, and the New UI keeps the day's stops in one list. Adding a stop to a route from a board that still shows it after it was removed elsewhere, for example when its transfer was deleted, is now refused with Invalid Stop, instead of adding a transfer stop that isn't linked to any transfer; refresh the board and try again.

Despacho y rutas

A direct delivery can be confirmed once its own pickup is

On an order where part of a pickup goes straight to a customer and the rest goes through a transfer, the direct delivery's Confirm button, in the New UI and the Old UI, now waits only for the pickup its items come from. It no longer stays disabled until the pickup from the transfer, on another route, is confirmed. A delivery fed by the transfer still waits for that pickup, and the tooltip on a disabled Confirm says whether it is waiting for the pickup or for the pickup from the transfer.

Pedidos y cotizaciones

Expanded orders show an item-less pickup and delivery on one row

When you expand an order on the Orders list, in the New UI and the Old UI, a pickup and a delivery that have no items are now shown together on one row, pickup first, instead of on two separate rows that each had their own status progress, and the order's Package Details tab lists them as one row too. With several such stops, they are paired in stop order. Orders whose stops carry items look the same as before.

Facturación y contabilidad

Saving an edited invoice always saves it or shows what to fix

In Accounting, Save, Save and Send and Save & Close on an invoice you are editing, for example after Add Fee, now always save it or point you to what needs fixing: invalid lines open for editing, and other invalid fields are highlighted with a message asking you to check them. Before, Save could do nothing at all, for example right after you corrected a value.

Facturación y contabilidad

Settings → Billing shows the invoice settings that are actually saved

Settings → Billing now loads your company's billing settings from the server each time you open it, so Create Invoices and the page's other settings show what is actually saved, even if they were changed in another tab or by another user since you opened the Portal. Before, the page could still show the values from when you opened the Portal, for example Manual while invoices were in fact being created automatically. Changes you have already started on the page are not overwritten.

Pedidos y cotizaciones

The Assign Driver panel keeps its page numbers in view and estimates a distance for drivers without a recent location

In an order's Assign Driver panel, in the New UI and the Old UI, the list of drivers now scrolls inside the panel and its page numbers stay pinned below it, so you can always reach the next page of drivers. Before, the rows above the list could push the page numbers below the bottom of the panel. Drivers without a recent GPS location now show an estimated distance, marked with "~" and a tooltip naming its source: the driver's last completed stop or, for users allowed to view driver details, the driver's home address. How many days back the driver's last known app location counts is a new setting, Settings → Driver App → Preferences → Last known location window (days), 30 days by default as before. The distance is measured to the stop that still needs a driver, using that stop's saved coordinates for companies that look up coordinates when an address is saved. While driver GPS history pruning is on, that window cannot be longer than the GPS retention period (and never more than 365 days), and Assign Driver uses no GPS location older than the retention. Lowering the retention under Settings → Profile → Driver data retention lowers the window too, and a message says so.

Integraciones y mapas

The AI assistant tells you when a route's toll costs can't be calculated

For companies connected to Trimble Maps, the AI assistant can look up truck tolls along a route. When no toll provider is connected for your company, it now says toll costs can't be calculated and that an administrator can connect one under Settings → Integrations, instead of reporting $0 in tolls. TollGuru is available there.

Pedidos y cotizaciones

Clean all data and Clear All no longer show an address error before you type

After Clean all data in a pickup or delivery address window, or Clear All on a New UI order stop, the emptied Address field no longer shows its required-field warning before you have entered anything; the checks still run when you edit or save. In the pickup window, Save, Save and add item and Add items later on an incomplete stop now point out the missing fields, as the delivery window already did, instead of doing nothing.

Plataforma

Saving a customer's Company information works when its locations share a title

Saving a customer's Company information, or editing the customer's address from an Old UI order, no longer fails with an address error when another of the customer's locations already has the same title as its main location, for example a location named after the customer. Giving a location a title the customer already uses is still refused.

Despacho y rutas

Confirm & Create Delivery offers the items left to deliver and asks which driver takes them

When you confirm an order's last stop with items left over and choose Confirm & Create Delivery, the Add Items to Delivery window now offers the items still to deliver. Before, the quantities you had just lowered were not counted yet, so the window showed nothing left to add and its Add All button read All Added. After you add items, you are asked "Assign to the same driver?": Yes gives the new delivery to the driver who has those items, as before, and No leaves it in Unassigned. While that new delivery has items to deliver, confirming the stop no longer closes the order. This works in the New UI and the Old UI.

Despacho y rutas

The Dispatch board no longer shows the same route cards twice

Scrolling down the Dispatch board while it was reloading its routes could add the next page of routes to the old list, so a block of route cards appeared twice. A reload now starts again from the first page and waits for it before loading more, and a route that is already on the board is never added a second time. This applies to the New UI and the Old UI.

Plataforma

Date picker calendars label the Sunday column

In the Portal's date pickers and date range pickers, the calendar's Sunday column had no heading. It now shows the day's short name like the other columns, in English and Hebrew.

Facturación y contabilidad

Each invoice paid by a bulk payment shows only its own share of the payment

Bulk payments: each invoice paid by a bulk payment now shows only its own share of the payment, in its balance, paid status and credit and in the order list, while the payment row still shows the full amount received. Customer balances are unchanged.

Facturación y contabilidad

Saving a new invoice no longer offers to replace an unrelated invoice

Saving a new invoice whose number matches an order number no longer offers to replace, and overwrite, an unrelated invoice.

Facturación y contabilidad

Invoice totals and invoices sent to QuickBooks leave out deleted lines

Invoices sent to QuickBooks no longer include deleted lines, and item lines are sent as price × quantity, so QuickBooks gets the same line amounts as the invoice. The invoice editor's total also no longer counts deleted lines, and an item without a quantity counts as zero, matching the saved invoice.

Despacho y rutas

Driver distances on the Dispatch board show two decimals

For companies that use miles, the distance from the driver to the selected stop on the Dispatch board showed every digit, for example "Driver is 12.394349587425422 mi away". It now shows two decimals, "Driver is 12.39 mi away". Route mileage on route cards already had two decimals and looks the same as before, and kilometers are unchanged. This applies to the New UI and the Old UI.

Despacho y rutas

Starting a shift in the Telegram bot no longer changes the driver of finished routes

When a driver starts a shift in the Telegram bot and picks a truck, completed and archived routes now keep their driver. Before, starting a shift took that driver off their own finished routes and put them on every finished route of the chosen truck, so a finished route could show no driver or the wrong one. Open routes still move to the driver who starts the shift, as before. Also, a driver who has no route can now send the truck photos when ending a shift; before, the bot refused each photo and asked for a picture taken on the device.

Despacho y rutas

The New Route button also appears in the Old UI dispatch list view

Dispatch (old interface): the New Route button now also appears in the toolbar in list view, not only in card view. Card view is now also kept in the page address, so a link or bookmark opens the view you chose. The separate list and card buttons are now one toggle that shows the view it switches to.

Pedidos y cotizaciones

Bills of lading print at 100% without manual scaling, and labels at their true 4 × 6 in size

Bills of lading printed from the Company Portal now print at 100% scale, with a typical one on a single Letter or A4 page, so there is no need to scale them down by hand, and pallet labels print at their true 4 × 6 in size, the same as the label PDF. Printed documents keep their background shading (for example the proof-of-delivery section headers and highlighted BOL items) even when the browser's Background graphics option is off. Invoices printed in the classic layout now use a plain Arial 12 px font on a white background.

Despacho y rutas

Orders with no saved route open for assignment instead of showing a route directions error

An order with no saved route, for example one created through the API, now opens for assignment, for example in its Assign Driver panel, instead of failing with "The system cannot find route directions for the provided order stop address." The route is looked up once and saved with the order, and the order's price is not changed. If no route can be found for the addresses, the same error is shown, and the lookup is tried again after a few hours or as soon as an address is corrected.

Plataforma

Lists move to a page they can show when a later page fails to load or comes back empty

In the Drivers list and the other lists of the Company Portal, when a later page fails to load or comes back empty, the list now moves to a page it can show, the new last page or the first page, keeping your search, sort and page size, instead of getting stuck on "No records found" with the page numbers gone.

Plataforma

Pages no longer keep loading forever after an update

If a page, such as a Settings page, cannot load because RushHour was updated while the app was open in your browser, the loading spinner no longer keeps spinning: the app reloads once to the page you opened. If the page still cannot load, for example while you are offline, a message tells you and reloads it when you click it. In a list with no rows, "No records found" is now centered in tables of a fixed height and stays in view when a wide table is scrolled sideways.

Integraciones y mapas

QuickBooks connections are better protected

QuickBooks connection details are now stored encrypted, each Connect to QuickBooks attempt is checked with a one-time code tied to the person connecting, and disconnecting also revokes access on the QuickBooks side. If renewing access fails, the connection shows Connection Expired so you can reconnect, and a connection that cannot be verified asks you to start again from Settings → Integrations.

Plataforma

User account changes and Customer Portal sign-in stay within the right company

Password resets, invites, enabling, disabling and deleting users, and Customer Portal login actions apply only to users in the admin's own company; only platform administrators can grant platform-level roles, and built-in roles and permissions are protected. Customer Portal sign-in and existing portal sessions are refused for deleted, disabled or suspended customers.

Plataforma

Permission checks on driver issues, live vehicle positions and order list actions

Reading driver-reported issues now requires View driver issues, and replying or changing their status requires Manage driver issues, limited to your own company's issues. Live vehicle positions and stored driver locations are limited to office roles. The Orders and Quotes list shows row, bulk and New Order actions only to users whose role allows them.

Plataforma

Tighter checks on AI assistant requests and on embedding the Portal

The in-app AI assistant now validates every API path it calls against a stricter rule set before sending it, and the Company Portal can no longer be embedded in pages on other websites. Sign-in credentials are also stripped from error reports.

Pedidos y cotizaciones

Tracking page and tracking-link emails are protected against misuse

The public tracking page's rate limit now counts each visitor's own address rather than the load balancer's. Blind stops appear only as an approximate area with the route line cut around them, and the arrival estimate is computed from that published point. Emailing tracking links is rate-limited per user, and AI assistants connected through MCP cannot send them.

Plataforma

Re-invites and invite redemptions keep their records in the invited account's own company

When a platform administrator re-invites a user or Customer Portal login of another company, or an invite link is opened in a browser still signed in to another company, the new invite, the consumed invite and the login's customer record now stay in the invited account's own company. Earlier invites for that account are also deactivated.

Plataforma

Driver and customer accounts can no longer sign in to the Company Portal

The Company Portal is now for office staff only. Driver accounts are told to use the RushHour driver app and customer accounts are given a link to the Customer Portal, with a clear message in English and Hebrew; driver and customer accounts that are already signed in are signed out, with the same message, the next time the Portal loads. Staff sign-in is unchanged, and the driver app and the Customer Portal work as before.

Plataforma

Route and order data hide drivers' personal details from users who can't view them

Route lists and route details, including the active routes the Driver Board's + button reads, and the route and driver data that comes with orders, now leave out each driver's social security number, date of birth, licence number, expiry and image, home address and open balance unless the user may view driver details, the same rule as the Drivers list. Driver names and route details are unchanged.

Portal de clientes

The Customer Portal no longer receives drivers' and trucks' personal details with a shipment's route

The Customer Portal now receives only the assigned driver's name for a shipment's route, without the driver's contact details, the truck's details or other customers' stops.

Plataforma

Telegram bot connection hardened, and drivers' Telegram IDs and document scans need driver-detail permission

The connection to the Telegram bot is now better protected. Staff without permission to view driver details no longer see a driver's Telegram ID or document scans, and global search no longer erases driver details when such staff use it.

Portal de clientes

Customers no longer receive staff notes, prices or staff names with an order's activity

The order activity the Customer Portal reads for its stop status now carries only shipment movement, item handling and hold events, with the stop, date, description and the driver's name and photo. Internal notes, the staff member who acted, old and new prices, invoice and route references, and the driver's rating of the customer's site are no longer sent.

Portal de clientes

Customers can cancel approved orders from the Customer Portal

Customers can now cancel an approved order themselves in the Customer Portal, not just quotes and drafts, as long as the order is not closed and none of its stops has been completed. If a stop has already been completed, the portal tells them the order can no longer be cancelled online and asks them to contact support.

Portal de clientes

Customers can invite their own colleagues to the Customer Portal

Customer Portal users can now invite colleagues to sign in to their own customer account, and re-send an invitation that has not been accepted yet, without waiting for your office team to set it up. Invited colleagues get an email with a link to set their own password. The option is on by default, and company admins can switch it off for customer portal users in role permissions.

Despacho y rutas

Driver instructions for individual pickup and delivery stops

Add a note for the driver, such as a gate code, dock number or "call on arrival", to a single pickup or delivery stop, from the order form or straight from a Dispatch route card. Stops with a note are flagged on the order and on Dispatch route cards, the note is included when you copy or send stop details to the driver (including over Telegram), and changes to it are recorded in the order's audit log.

Integraciones y mapas

Connect Trimble Maps, and use your map vendor for more lookups

Connect your Trimble Maps account under Settings → Integrations, with separate switches for address search and directions; Trimble is not used to draw the map itself. If you connect Radar, HERE, Mapbox or Trimble Maps with address search turned on, that vendor also turns coordinates into an address, finds nearby fuel stops and amenities, and handles the AI assistant's address and place lookups. The pricing-zone editor now uses the map provider your company has selected.

Choferes y app de choferes

Driver History tab now shows a driver's orders and routes

The History tab on a driver's profile is now available. Switch between the orders assigned to that driver, with From and To addresses, price and status, and the routes they've been assigned, both listed newest first. The orders view has search and a date-range picker with quick presets, you can link straight to the tab, and search on a customer's Orders tab now works too.

Integraciones y mapas

Connect your own HERE or Mapbox account for maps and routing

You can now connect your own HERE or Mapbox account in Settings > Integrations and use it for address search, directions and route optimization, switching each one on or off. HERE Maps and Mapbox are also now map provider choices. Nothing changes for your company until you add your own keys.

Facturación y contabilidad

Add or correct waiting time directly from an invoice

You can now add or correct a stop's waiting time from the invoice editor, without undoing and re-confirming the stop. Pick the stop and set arrival, departure and free time: the fee is priced from your company's Waiting Time rate when one is set up, the stop's own times update to match, and existing waiting-time lines reopen in the same window. In stop confirmation, a longer typed waiting time now moves departure out to fit.

Integraciones y mapas

Connect your own Radar account for maps, address search and routing

Companies with a Radar.com account can now connect it under Settings > Integrations and use Radar for address search, driving directions and mileage, and route optimization on smaller routes, each switched on separately. You can also pick Radar Maps as your map provider, choose a truck or car profile and a map style, and check your keys with a built-in connection test.

Facturación y contabilidad

Send a single payment to QuickBooks

For companies connected to QuickBooks, staff with permission to send to QuickBooks can now send a single payment from its menu in an invoice's payment list, on both the classic and redesigned Accounting screens. A payment that isn't eligible yet, for example because its invoice isn't in QuickBooks, is reported as skipped. Manual Send to QuickBooks actions for invoices and payments now list the invoice and payment numbers that were sent, rejected by QuickBooks, queued for automatic retry, failed, or skipped.

Pedidos y cotizaciones

Save orders with no drivable route and assign hubs later

When the map lookup finds no road route between a pickup and its delivery, such as on an overseas shipment, the order now saves instead of being rejected, and both stops are flagged Assign HUB. Choose a warehouse near each end whenever you are ready, and the order runs as two separate legs with the hub stops marked HUB. An order that already has a price also keeps its existing distance-based charges if a route lookup fails.

Facturación y contabilidad

QuickBooks exports wait for approved invoices, with clearer results

With QuickBooks Online connected, automatic sends, manual sends and re-syncs export an invoice only once it is approved and set as the default invoice, and its order is closed (or it has no order), so drafts stay out of your books. In automatic mode, an invoice that is not ready yet gets an "Awaiting QuickBooks Eligibility" entry in the order's invoice audit log. Manual sends now list which invoice and payment numbers were sent, skipped or rejected, and the send button is disabled while a send is running.

Portal de clientes

Invite existing contacts to the Customer Portal in one click

Admins can now invite a customer's existing contacts to the Customer Portal straight from the Customer Portal Access dialog: one click per contact, or several at once with Invite selected or Invite all. The list shows contacts that have a valid email and don't yet have a portal login for that customer. Each person invited gets an email with a link to set their own password.

Despacho y rutas

Lighter, faster loading for large routes

Opening a large route's stops now downloads far less data, because stops no longer carry a hidden, repeated list of related stops that no screen used. Large routes load faster in route details on the dispatch board, and when you transfer stops, print BOLs or copy stop details for a driver. What you see on those screens is unchanged.

Facturación y contabilidad

Choose where a new invoice charge type is saved

When you create a new charge type while editing an invoice, you can now tick one or more places to save it: the company-wide charge types list in Settings, the billing customer, and any of the order's pickup or delivery customers (listed as Pickup #1, Delivery #1 and so on). The billing customer is ticked by default, and Create New now also works on invoices that have no billing customer yet.

Integraciones y mapas

Paste map links from more map apps into customer addresses

The Map Link field on a customer address now reads the location from OpenStreetMap, HERE WeGo, Bing Maps, Apple Maps and Waze links that include coordinates, as well as from Google Maps links. Shortened HERE WeGo links to a dropped pin now work alongside shortened Google Maps links, and applying the link fills in the address from that spot. The field is now labelled "Map Link" instead of "Google Map Link", with matching Hebrew wording.

Facturación y contabilidad

A more compact Accounting transactions list

The Accounting transactions list has fewer columns, so it needs less sideways scrolling. Download, QuickBooks and email indicators now sit in the Status cell instead of three separate columns, Items is a slim Qty column, and a number shared by an invoice and its order is shown once. In the new accounting view, invoice and order numbers sit inside their coloured labels.

Facturación y contabilidad

QuickBooks payments now wait until every linked invoice is ready

For companies connected to QuickBooks Online: a payment is sent to QuickBooks only once every invoice it is applied to is ready for QuickBooks and already in QuickBooks. While it waits, the invoice audit log records the hold and lists the invoices it is waiting on; once they are ready, the payment is sent automatically in the background. A payment already in QuickBooks is updated there, not added a second time.

Integraciones y mapas

Integration Test connection now stops after about 20 seconds

Test connection for map and routing integrations in Settings > Integrations (Valhalla, VROOM, Radar, HERE, Mapbox and Trimble Maps) now stops waiting after about 20 seconds. If the service doesn't answer in time, you'll see a message that the test timed out and a reminder to check the URL and that the host is reachable. Before, a slow or unreachable Valhalla server could leave you on a long spinner that ended in a generic error.

Despacho y rutas

Archive prompt after the last stop now appears on order screens too

If you mark a route's last open stop as picked up or delivered from the order page, you now get the same prompt as on the dispatch board: archive the route or keep it running. From the order page, the portal first checks that every stop on the route is confirmed. Only users with permission to archive routes see the prompt.

Pedidos y cotizaciones

Open the billing customer's profile from an order or quote

On order and quote pages, the billing customer's name is now a link to that customer's profile, opening on the Contacts tab. It opens in a new tab so you keep your place on the order, and you can reach it with the keyboard or middle-click it to open in a background tab. Orders without a billing customer show no link.

Despacho y rutas

Simpler Add Charge popup when confirming a stop

When you create a new additional charge while confirming a stop, the popup now asks only for the name, price per unit, and the Enter Amount and Overridable Price options, the same short form used on a customer's Additional Charges tab. The new charge is saved to your company's charge list and added to the stop. Its QuickBooks item name is taken from the charge name, and the other advanced charge settings stay in Settings.

Despacho y rutas

Appointment request emails no longer show internal stop numbers

Appointment request emails, both the first request and the follow-up proposing a new time, no longer show an internal stop number such as "Stop 3" next to the order number. The reference line now shows only the order number, and the email still includes the location name and address when they are on file.

Pedidos y cotizaciones

Tidier, more compact trip details in expanded order rows

Expanding an order on the Orders list now shows a more compact trip panel with less empty space. Addresses, the attachment button and the driver and truck stay lined up in columns across trip rows, long driver names are shortened with the full name on hover, and the Pickup or Delivery label now shares a line with its date and time.

Plataforma

Customer address edits no longer disappear on Save

On some customer records, address changes (Location Details, Company Location, country, state, city or zip) could fail to save even though the screen said the customer was updated. Those edits now save, and if an address is ever refused you get an error message instead of a success message. The rule that a customer needs at least one email address also keeps applying after you delete an email.

Facturación y contabilidad

Customer credit and spending charts now show real account figures

A customer's monthly spending chart now shows zero for months with no recorded spend. The Credit tab shows that customer's own credit limit, balance used, available credit, credit terms and latest credit request status, and pending requests are labelled Pending. The Trucks list shows each truck's saved insurance cost, and overview cards with no data behind them yet show a clear placeholder.

Despacho y rutas

Driver distances show for more drivers when assigning an order

When assigning a driver to an order, the distance next to a driver was often missing: unless the truck had a live position from a connected fleet-tracking integration, the distance could only use a location the driver app had reported in the past 24 hours. It now uses the driver's last location reported through the driver app in the past 30 days, so more drivers show a distance. This is a straight-line distance from the last known location, which may not be where the driver is right now.

Despacho y rutas

Unassigned transfer orders no longer leave hand-off stops behind

When a dispatcher unassigns the stops on both sides of a driver-to-driver transfer, the hand-off stops are now removed from both drivers' routes too, instead of staying on them. Transfers that are already partly completed or in progress are not deleted.

Plataforma

Lists no longer load twice when you open a page

Opening Orders, Quotes, Customers, Drivers, Documents, Inbox, the dispatch board, many Settings lists or the accounting customer list could fetch the same data a second time right after the first load. On Orders and Quotes, rows appeared, flashed back to loading, then appeared again. That extra second load no longer happens.

Choferes y app de choferes

Hours of Service: daily summary and rest-period status fixes

In the driver app's Hours of Service screen, the daily summary now appears with zero hours for a day that has no hours recorded yet, instead of being left out. A driver who has stayed in the same off-duty or sleeper-berth status for 10 hours or more is no longer shown as having just started a shift. The app shows no shift in progress for as long as that rest continues.

Confiabilidad y rendimiento

Opening a customer, driver, order or quote now rides out a brief blip

Opening a customer, driver, outsource company, order or quote (from the list, a bookmark or a shared link) now retries once when the first request fails for a temporary reason, such as a dropped connection or a brief server error. Previously that one failure could leave the record blank, or close it and remove it from the address bar. A record that doesn't exist or that you can't access is not retried.

Pedidos y cotizaciones

Full Load items need dimensions or a pallet size in classic order view

In the classic order view, a Full Load item now needs its dimensions before it can be saved, or a pallet size if it is packed on pallets, matching the new order view. The same check now applies when you add or edit an item while confirming a stop on a route. The classic order view also keeps the truck type and pallet size you pick instead of clearing them when you save.

Pedidos y cotizaciones

Order stops now save after re-picking the same company

When editing a pickup or delivery stop, picking the company that was already on the stop from the list could leave a validation error on the company name and block Save. The company and contact name pickers now store just the selected name, so the stop saves as expected.

Plataforma

Enter a city that isn't in the City list

In the RushHour web app, the City drop-down on address forms now accepts a city that isn't in its list. Choose the state, type the city name, pick "Use city" and save as usual, so a missing town no longer blocks an address. A city you type in yourself doesn't pre-fill the ZIP code.

Despacho y rutas

Dispatch board search box now shows the active search

On the new dispatch board, the Search Driver box now shows the term the routes are filtered by when you open the board from a saved or shared link, an order's View in Dispatch button, or a route picked in global search. Previously the box could stay blank while the list was filtered, so the board looked unfiltered. Typing in the box works as before.

Confiabilidad y rendimiento

Save now re-checks a just-typed ZIP code before storing it

Clicking Save straight from a ZIP or postal code field could occasionally store a value the form was flagging as invalid at that same moment. Save now checks the form's current values at the moment you click, so an invalid entry is blocked instead of saved. This covers the customer, customer contact, customer location, driver, outsource company, user and company profile forms, plus the customer address dialog in the order editor.

Pedidos y cotizaciones

Bill of Lading picker no longer lists transfer hand-offs

On orders that include a transfer, the list for choosing which Bill of Lading to open no longer shows the transfer's internal hand-off stop as a separate delivery. It lists the billing copy and your actual deliveries, numbered the same way the order page numbers them.

Facturación y contabilidad

Accounting: Clear Filters stays visible; customer panel handles errors

In Accounting on the new interface, the Clear Filters link now stays visible when you turn off both the Invoice and Payment type buttons, so you can reset the filters in one click. If a customer's details fail to load when you open the page, the customer panel no longer stays blank and still shows your customer list. Whether you open the page or come back from the filter view, transactions stay scoped to the selected customer.

Plataforma

Customer profile screens cleaned up for dark mode

In dark mode, customer profile form fields are no longer bright white, and chart rings and axis labels now match the theme, including on the classic customer screen and on outsource company screens. On the default customer page, the star rating now sits on its own line under the customer name, so long names no longer squeeze it into a column, and the spending chart notes when a customer has had no spending in the last 7 months.

Plataforma

User sessions tab in the Activity Log now loads when you open it

The User sessions tab in Settings > Activity Log now loads its sessions as soon as you open it, instead of showing an empty table. The All, AI Activity and System Activity tabs now also use numbered pages and a 15/20/50/100 rows-per-page selector, like the User sessions tab.

Despacho y rutas

Tidier Assign Driver controls and steadier country picker

In the Assign Driver panel, the All / Available / Full filter is now the same height as the search box beside it. Country names in the country picker no longer shift sideways while their flags load.

Plataforma

Email type option now reads "Bill Of Lading"

The email-type picker on customer, contact and outsource company forms now spells its "Bill Of Lading" option correctly. It is the same option as before, so existing email settings are unchanged. The picker's dropdown arrow also has a little more space, and in the older interface the Broker Account and Lead checkboxes on the new-customer form now line up with the fields beside them.

Plataforma

Tighter data access for the customer portal and driver app

Tightened what company account data the customer portal and driver app can read.